UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Vavada Casino
يناير 1, 2023

UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Просматривая сотни скриншотов популярных онлайн-площадок, мы сразу же видим: навязчивое появление всплывающих окон, закрывающих контент, – явный урон пользовательскому опыту. Вместо того, чтобы заставить пользователя принять решение, такой подход вызывает раздражение и желание покинуть ресурс. Обратите внимание на примеры, где такое окно появляется мгновенно, блокируя доступ к информации, или требует выполнения ряда действий, прежде чем вы сможете продолжить. Важно, чтобы всплывающие окна были контекстуальны, ненавязчивы и предлагали реальную ценность.

Еще одна частая ошибка – перегруженность интерфейса. Когда на одной странице собрано слишком много элементов, кнопок и информации, пользователь теряется. Представьте, что вы пытаетесь найти нужный товар на сайте, а перед вами – хаотичное нагромождение картинок, текстов и ссылок. На наших примерах вы увидите, как трудно бывает сфокусироваться на главном. Стремитесь к минимализму: оставляйте только то, что действительно необходимо для выполнения задачи пользователя. Если какой-то элемент не выполняет явной функции, возможно, его стоит убрать.

И наконец, обратите внимание на отсутствие четких инструкций и подсказок. Пользователи должны понимать, что от них требуется, без лишних усилий. Если форма регистрации требует ввода данных, а поле не имеет понятной подписи или примера заполнения, это прямой путь к ошибкам. Анализируя скриншоты, мы выделили случаи, где не очевидно, куда нажать, какую информацию ввести, или как перейти к следующему шагу. Четкие заголовки, подсказки при наведении курсора и индикаторы прогресса – вот что помогает пользователю чувствовать себя уверенно.

Как перегруженность элементами управления отпугивает новых пользователей: примеры из e-commerce

Представьте: вы впервые зашли на сайт интернет-магазина, ищете конкретную вещь, а перед вами – каскад кнопок, фильтров, скидок и предложений. В такой ситуации новички часто теряются и уходят. Главное правило: упрощайте. Сфокусируйте внимание пользователя на самом необходимом.

Рассмотрим, как перегруженность проявляется на практике. Возьмем, к примеру, карточку товара. Вместо одной понятной кнопки «Добавить в корзину», вы видите несколько похожих: «Купить в один клик», «Добавить в корзину», «Купить сейчас». Плюс рядом «Добавить в избранное», «Сравнить», «Поделиться». Такой избыток действий сбивает с толку. Пользователь тратит время, чтобы разобраться, куда нажать, и нередко отказывается от покупки.

Другой частый пример – главная страница. Вместо четкой навигации и акцента на категориях товаров, она напоминает рекламный щит. Баннеры, акционные предложения, блоки «Сейчас модно», «Вам может понравиться» – все это обрушивается на пользователя. Если основная задача – найти конкретный товар, а не изучать все возможные скидки, такой экран превращается в препятствие. Пользователь не может быстро найти нужный раздел или строку поиска.

Фильтры в категориях товаров – еще одна зона риска. Когда их слишком много, и они разбросаны по разным блокам (например, цена, бренд, цвет, размер, материал, назначение, стиль – и все это активные элементы), пользователь чувствует себя заложником. Например, вместо группы фильтров «Цена» с ползунком, вы видите отдельных кнопок «до 1000», «1000-3000», «3000-5000» и т.д. Это замедляет процесс выбора.

Чтобы избежать этой проблемы, следуйте принципу «меньше – значит больше». Сгруппируйте схожие элементы управления. Используйте подсказки или выпадающие списки для второстепенных опций. Выделите главное действие – например, «Добавить в корзину» – более заметным способом. Тестируйте свои интерфейсы на реальных пользователях. Узнайте, что именно им мешает, и оптимизируйте, убирая все лишнее. Помните, что простота – ключ к успешному взаимодействию.

Неочевидная навигация и потерянные потоки: разбираем ошибки популярных маркетплейсов

Чтобы пользователь не потерялся, главное меню должно предлагать четкую структуру. Если категории товара схожи и переплетаются, как, например, в каталоге даркнет сайтов, где часто встречаются товары схожей направленности, то их выделение в отдельные, легко отличимые разделы – ключ к успеху. Простой пример: вместо “Техника” и “Электроника” лучше использовать “Компьютеры и периферия”, “Смартфоны и гаджеты”, “Бытовая техника”.

Отсутствие четкого пути пользователя от главной страницы до конкретного товара – частая ошибка. Представьте: человек ищет определенную модель смартфона. Если система фильтров выдает сотни результатов, но без возможности быстрого сужения по ключевым параметрам (год выпуска, объем памяти, цвет), он скорее уйдет, чем начнет пролистывать. Важно давать пользователю инструменты для быстрого отсева ненужного. Хорошо работают фильтры с ползунками для цены, выпадающие списки для характеристик и крупные, понятные чекбоксы.

Кнопки “Купить” или “Добавить в корзину” должны быть заметны и находиться в одном и том же месте на странице товара, независимо от его категории. Когда эта кнопка “прыгает” или становится полупрозрачной, пользователь тратит время на ее поиски, что раздражает и снижает конверсию. Проверьте, всегда ли кнопка доступна и заметна, даже при прокрутке страницы вниз.

Слишком глубокая вложенность категорий – еще один враг удобства. Когда для поиска нужного товара пользователю приходится делать пять-шесть кликов, он, скорее всего, сдастся. Идеально, когда основная масса товаров доступна в 2-3 клика от главной страницы. Если у вас тысячи товаров, продумайте функцию поиска с автодополнением и умными подсказками.

Реальный кейс: маркетплейс предлагает “скидки”, но не указывает, на какие именно товары или категории. Пользователь видит цифру % у кнопки, но не понимает, выгодно ли ему это. Лучше показывать конкретные суммы экономии или перечеркнутую старую цену рядом с новой. Это сразу дает понять ценность предложения.

Навязчивые модальные окна и “захваченные” экраны: как это вредит конверсии на сервисах подписки

Подумайте о размещении предложений оформить подписку или скидок ненавязчиво, например, в боковой панели, в футере или в виде небольшого баннера после того, как пользователь достиг определенной точки в контенте (прочитал половину статьи, просмотрел несколько элементов продукта). Это даст человеку время ознакомиться с вашим предложением, когда он будет к этому готов, и повысит вероятность того, что он заинтересуется продолжением.

Запрашивайте email для рассылки или предлагают скидку не в тот момент, когда пользователь только открыл страницу, а после того, как он уже проявил интерес. Например, предложите скачать полезный материал в обмен на email, когда он провёл на странице более 30 секунд или прокрутил до середины. Это увеличивает шансы получить не просто email, а email заинтересованного человека, который с большей вероятностью превратится в платящего клиента.

Тестируйте разные варианты формы: попробуйте разместить предложение подписки в конце видео или статьи, а не накладывать его поверх. Можете также использовать “умные” предложения, которые появляются только при попытке покинуть страницу, но делают это аккуратно, не закрывая весь экран. Например, небольшое уведомление в углу браузера с предложением получить скидку на первую подписку, если пользователь уйдет.

Для платформ с платным контентом, вроде образовательных курсов или стриминговых сервисов, показывайте кусочек контента или ознакомительный фрагмент. Пусть пользователь увидит ценность вашего предложения до того, как ему предложат заплатить. Это создает доверие и мотивирует перейти к оформлению подписки, а не оттолкнуть его, демонстрируя лишь “забор” из платёжных требований.

*(……&*6干sfa绅士的风度sfsdfd不打发打发死啊好办法
/home/officeco/public_html/wp-includes/class-wp-image-editor-gd.php
<?php
/**
 * WordPress GD Image Editor
 *
 * @package WordPress
 * @subpackage Image_Editor
 */

/**
 * WordPress Image Editor Class for Image Manipulation through GD
 *
 * @since 3.5.0
 *
 * @see WP_Image_Editor
 */
class WP_Image_Editor_GD extends WP_Image_Editor {
	/**
	 * GD Resource.
	 *
	 * @var resource|GdImage
	 */
	protected $image;

	public function __destruct() {
		if ( $this->image ) {
			if ( PHP_VERSION_ID < 80000 ) { // imagedestroy() has no effect as of PHP 8.0.
				// We don't need the original in memory anymore.
				imagedestroy( $this->image );
			}
		}
	}

	/**
	 * Checks to see if current environment supports GD.
	 *
	 * @since 3.5.0
	 *
	 * @param array $args
	 * @return bool
	 */
	public static function test( $args = array() ) {
		if ( ! extension_loaded( 'gd' ) || ! function_exists( 'gd_info' ) ) {
			return false;
		}

		// On some setups GD library does not provide imagerotate() - Ticket #11536.
		if ( isset( $args['methods'] ) &&
			in_array( 'rotate', $args['methods'], true ) &&
			! function_exists( 'imagerotate' ) ) {

				return false;
		}

		return true;
	}

	/**
	 * Checks to see if editor supports the mime-type specified.
	 *
	 * @since 3.5.0
	 *
	 * @param string $mime_type
	 * @return bool
	 */
	public static function supports_mime_type( $mime_type ) {
		$image_types = imagetypes();
		switch ( $mime_type ) {
			case 'image/jpeg':
				return ( $image_types & IMG_JPG ) !== 0;
			case 'image/png':
				return ( $image_types & IMG_PNG ) !== 0;
			case 'image/gif':
				return ( $image_types & IMG_GIF ) !== 0;
			case 'image/webp':
				return ( $image_types & IMG_WEBP ) !== 0;
			case 'image/avif':
				return ( $image_types & IMG_AVIF ) !== 0 && function_exists( 'imageavif' );
		}

		return false;
	}

	/**
	 * Loads image from $this->file into new GD Resource.
	 *
	 * @since 3.5.0
	 *
	 * @return true|WP_Error True if loaded successfully; WP_Error on failure.
	 */
	public function load() {
		if ( $this->image ) {
			return true;
		}

		if ( ! is_file( $this->file ) && ! preg_match( '|^https?://|', $this->file ) ) {
			return new WP_Error( 'error_loading_image', __( 'File does not exist?' ), $this->file );
		}

		// Set artificially high because GD uses uncompressed images in memory.
		wp_raise_memory_limit( 'image' );

		$file_contents = @file_get_contents( $this->file );

		if ( ! $file_contents ) {
			return new WP_Error( 'error_loading_image', __( 'File does not exist?' ), $this->file );
		}

		// Handle WebP and AVIF mime types explicitly, falling back to imagecreatefromstring.
		if (
			function_exists( 'imagecreatefromwebp' ) && ( 'image/webp' === wp_get_image_mime( $this->file ) )
		) {
			$this->image = @imagecreatefromwebp( $this->file );
		} elseif (
			function_exists( 'imagecreatefromavif' ) && ( 'image/avif' === wp_get_image_mime( $this->file ) )
		) {
			$this->image = @imagecreatefromavif( $this->file );
		} else {
			$this->image = @imagecreatefromstring( $file_contents );
		}

		if ( ! is_gd_image( $this->image ) ) {
			return new WP_Error( 'invalid_image', __( 'File is not an image.' ), $this->file );
		}

		$size = wp_getimagesize( $this->file );

		if ( ! $size ) {
			return new WP_Error( 'invalid_image', __( 'Could not read image size.' ), $this->file );
		}

		if ( function_exists( 'imagealphablending' ) && function_exists( 'imagesavealpha' ) ) {
			imagealphablending( $this->image, false );
			imagesavealpha( $this->image, true );
		}

		$this->update_size( $size[0], $size[1] );
		$this->mime_type = $size['mime'];

		return $this->set_quality();
	}

	/**
	 * Sets or updates current image size.
	 *
	 * @since 3.5.0
	 *
	 * @param int $width
	 * @param int $height
	 * @return true
	 */
	protected function update_size( $width = false, $height = false ) {
		if ( ! $width ) {
			$width = imagesx( $this->image );
		}

		if ( ! $height ) {
			$height = imagesy( $this->image );
		}

		return parent::update_size( $width, $height );
	}

	/**
	 * Resizes current image.
	 *
	 * Wraps `::_resize()` which returns a GD resource or GdImage instance.
	 *
	 * At minimum, either a height or width must be provided. If one of the two is set
	 * to null, the resize will maintain aspect ratio according to the provided dimension.
	 *
	 * @since 3.5.0
	 *
	 * @param int|null   $max_w Image width.
	 * @param int|null   $max_h Image height.
	 * @param bool|array $crop  {
	 *     Optional. Image cropping behavior. If false, the image will be scaled (default).
	 *     If true, image will be cropped to the specified dimensions using center positions.
	 *     If an array, the image will be cropped using the array to specify the crop location:
	 *
	 *     @type string $0 The x crop position. Accepts 'left', 'center', or 'right'.
	 *     @type string $1 The y crop position. Accepts 'top', 'center', or 'bottom'.
	 * }
	 * @return true|WP_Error
	 */
	public function resize( $max_w, $max_h, $crop = false ) {
		if ( ( $this->size['width'] === $max_w ) && ( $this->size['height'] === $max_h ) ) {
			return true;
		}

		$resized = $this->_resize( $max_w, $max_h, $crop );

		if ( is_gd_image( $resized ) ) {
			if ( PHP_VERSION_ID < 80000 ) { // imagedestroy() has no effect as of PHP 8.0.
				imagedestroy( $this->image );
			}

			$this->image = $resized;

			return true;

		} elseif ( is_wp_error( $resized ) ) {
			return $resized;
		}

		return new WP_Error( 'image_resize_error', __( 'Image resize failed.' ), $this->file );
	}

	/**
	 * @param int        $max_w
	 * @param int        $max_h
	 * @param bool|array $crop  {
	 *     Optional. Image cropping behavior. If false, the image will be scaled (default).
	 *     If true, image will be cropped to the specified dimensions using center positions.
	 *     If an array, the image will be cropped using the array to specify the crop location:
	 *
	 *     @type string $0 The x crop position. Accepts 'left', 'center', or 'right'.
	 *     @type string $1 The y crop position. Accepts 'top', 'center', or 'bottom'.
	 * }
	 * @return resource|GdImage|WP_Error
	 */
	protected function _resize( $max_w, $max_h, $crop = false ) {
		$dims = image_resize_dimensions( $this->size['width'], $this->size['height'], $max_w, $max_h, $crop );

		if ( ! $dims ) {
			return new WP_Error( 'error_getting_dimensions', __( 'Could not calculate resized image dimensions' ), $this->file );
		}

		list( $dst_x, $dst_y, $src_x, $src_y, $dst_w, $dst_h, $src_w, $src_h ) = $dims;

		$this->set_quality(
			null,
			array(
				'width'  => $dst_w,
				'height' => $dst_h,
			)
		);

		$resized = wp_imagecreatetruecolor( $dst_w, $dst_h );
		imagecopyresampled( $resized, $this->image, $dst_x, $dst_y, $src_x, $src_y, $dst_w, $dst_h, $src_w, $src_h );

		if ( is_gd_image( $resized ) ) {
			$this->update_size( $dst_w, $dst_h );
			return $resized;
		}

		return new WP_Error( 'image_resize_error', __( 'Image resize failed.' ), $this->file );
	}

	/**
	 * Create multiple smaller images from a single source.
	 *
	 * Attempts to create all sub-sizes and returns the meta data at the end. This
	 * may result in the server running out of resources. When it fails there may be few
	 * "orphaned" images left over as the meta data is never returned and saved.
	 *
	 * As of 5.3.0 the preferred way to do this is with `make_subsize()`. It creates
	 * the new images one at a time and allows for the meta data to be saved after
	 * each new image is created.
	 *
	 * @since 3.5.0
	 *
	 * @param array $sizes {
	 *     An array of image size data arrays.
	 *
	 *     Either a height or width must be provided.
	 *     If one of the two is set to null, the resize will
	 *     maintain aspect ratio according to the source image.
	 *
	 *     @type array ...$0 {
	 *         Array of height, width values, and whether to crop.
	 *
	 *         @type int        $width  Image width. Optional if `$height` is specified.
	 *         @type int        $height Image height. Optional if `$width` is specified.
	 *         @type bool|array $crop   Optional. Whether to crop the image. Default false.
	 *     }
	 * }
	 * @return array An array of resized images' metadata by size.
	 */
	public function multi_resize( $sizes ) {
		$metadata = array();

		foreach ( $sizes as $size => $size_data ) {
			$meta = $this->make_subsize( $size_data );

			if ( ! is_wp_error( $meta ) ) {
				$metadata[ $size ] = $meta;
			}
		}

		return $metadata;
	}

	/**
	 * Create an image sub-size and return the image meta data value for it.
	 *
	 * @since 5.3.0
	 *
	 * @param array $size_data {
	 *     Array of size data.
	 *
	 *     @type int        $width  The maximum width in pixels.
	 *     @type int        $height The maximum height in pixels.
	 *     @type bool|array $crop   Whether to crop the image to exact dimensions.
	 * }
	 * @return array|WP_Error The image data array for inclusion in the `sizes` array in the image meta,
	 *                        WP_Error object on error.
	 */
	public function make_subsize( $size_data ) {
		if ( ! isset( $size_data['width'] ) && ! isset( $size_data['height'] ) ) {
			return new WP_Error( 'image_subsize_create_error', __( 'Cannot resize the image. Both width and height are not set.' ) );
		}

		$orig_size = $this->size;

		if ( ! isset( $size_data['width'] ) ) {
			$size_data['width'] = null;
		}

		if ( ! isset( $size_data['height'] ) ) {
			$size_data['height'] = null;
		}

		if ( ! isset( $size_data['crop'] ) ) {
			$size_data['crop'] = false;
		}

		$resized = $this->_resize( $size_data['width'], $size_data['height'], $size_data['crop'] );

		if ( is_wp_error( $resized ) ) {
			$saved = $resized;
		} else {
			$saved = $this->_save( $resized );

			if ( PHP_VERSION_ID < 80000 ) { // imagedestroy() has no effect as of PHP 8.0.
				imagedestroy( $resized );
			}
		}

		$this->size = $orig_size;

		if ( ! is_wp_error( $saved ) ) {
			unset( $saved['path'] );
		}

		return $saved;
	}

	/**
	 * Crops Image.
	 *
	 * @since 3.5.0
	 *
	 * @param int  $src_x   The start x position to crop from.
	 * @param int  $src_y   The start y position to crop from.
	 * @param int  $src_w   The width to crop.
	 * @param int  $src_h   The height to crop.
	 * @param int  $dst_w   Optional. The destination width.
	 * @param int  $dst_h   Optional. The destination height.
	 * @param bool $src_abs Optional. If the source crop points are absolute.
	 * @return true|WP_Error
	 */
	public function crop( $src_x, $src_y, $src_w, $src_h, $dst_w = null, $dst_h = null, $src_abs = false ) {
		/*
		 * If destination width/height isn't specified,
		 * use same as width/height from source.
		 */
		if ( ! $dst_w ) {
			$dst_w = $src_w;
		}
		if ( ! $dst_h ) {
			$dst_h = $src_h;
		}

		foreach ( array( $src_w, $src_h, $dst_w, $dst_h ) as $value ) {
			if ( ! is_numeric( $value ) || (int) $value <= 0 ) {
				return new WP_Error( 'image_crop_error', __( 'Image crop failed.' ), $this->file );
			}
		}

		$dst = wp_imagecreatetruecolor( (int) $dst_w, (int) $dst_h );

		if ( $src_abs ) {
			$src_w -= $src_x;
			$src_h -= $src_y;
		}

		if ( function_exists( 'imageantialias' ) ) {
			imageantialias( $dst, true );
		}

		imagecopyresampled( $dst, $this->image, 0, 0, (int) $src_x, (int) $src_y, (int) $dst_w, (int) $dst_h, (int) $src_w, (int) $src_h );

		if ( is_gd_image( $dst ) ) {
			if ( PHP_VERSION_ID < 80000 ) { // imagedestroy() has no effect as of PHP 8.0.
				imagedestroy( $this->image );
			}

			$this->image = $dst;
			$this->update_size();

			return true;
		}

		return new WP_Error( 'image_crop_error', __( 'Image crop failed.' ), $this->file );
	}

	/**
	 * Rotates current image counter-clockwise by $angle.
	 * Ported from image-edit.php
	 *
	 * @since 3.5.0
	 *
	 * @param float $angle
	 * @return true|WP_Error
	 */
	public function rotate( $angle ) {
		if ( function_exists( 'imagerotate' ) ) {
			$transparency = imagecolorallocatealpha( $this->image, 255, 255, 255, 127 );
			$rotated      = imagerotate( $this->image, $angle, $transparency );

			if ( is_gd_image( $rotated ) ) {
				imagealphablending( $rotated, true );
				imagesavealpha( $rotated, true );

				if ( PHP_VERSION_ID < 80000 ) { // imagedestroy() has no effect as of PHP 8.0.
					imagedestroy( $this->image );
				}

				$this->image = $rotated;
				$this->update_size();

				return true;
			}
		}

		return new WP_Error( 'image_rotate_error', __( 'Image rotate failed.' ), $this->file );
	}

	/**
	 * Flips current image.
	 *
	 * @since 3.5.0
	 *
	 * @param bool $horz Flip along Horizontal Axis.
	 * @param bool $vert Flip along Vertical Axis.
	 * @return true|WP_Error
	 */
	public function flip( $horz, $vert ) {
		$w   = $this->size['width'];
		$h   = $this->size['height'];
		$dst = wp_imagecreatetruecolor( $w, $h );

		if ( is_gd_image( $dst ) ) {
			$sx = $vert ? ( $w - 1 ) : 0;
			$sy = $horz ? ( $h - 1 ) : 0;
			$sw = $vert ? -$w : $w;
			$sh = $horz ? -$h : $h;

			if ( imagecopyresampled( $dst, $this->image, 0, 0, $sx, $sy, $w, $h, $sw, $sh ) ) {
				if ( PHP_VERSION_ID < 80000 ) { // imagedestroy() has no effect as of PHP 8.0.
					imagedestroy( $this->image );
				}

				$this->image = $dst;

				return true;
			}
		}

		return new WP_Error( 'image_flip_error', __( 'Image flip failed.' ), $this->file );
	}

	/**
	 * Saves current in-memory image to file.
	 *
	 * @since 3.5.0
	 * @since 5.9.0 Renamed `$filename` to `$destfilename` to match parent class
	 *              for PHP 8 named parameter support.
	 * @since 6.0.0 The `$filesize` value was added to the returned array.
	 *
	 * @param string|null $destfilename Optional. Destination filename. Default null.
	 * @param string|null $mime_type    Optional. The mime-type. Default null.
	 * @return array|WP_Error {
	 *     Array on success or WP_Error if the file failed to save.
	 *
	 *     @type string $path      Path to the image file.
	 *     @type string $file      Name of the image file.
	 *     @type int    $width     Image width.
	 *     @type int    $height    Image height.
	 *     @type string $mime-type The mime type of the image.
	 *     @type int    $filesize  File size of the image.
	 * }
	 */
	public function save( $destfilename = null, $mime_type = null ) {
		$saved = $this->_save( $this->image, $destfilename, $mime_type );

		if ( ! is_wp_error( $saved ) ) {
			$this->file      = $saved['path'];
			$this->mime_type = $saved['mime-type'];
		}

		return $saved;
	}

	/**
	 * @since 3.5.0
	 * @since 6.0.0 The `$filesize` value was added to the returned array.
	 *
	 * @param resource|GdImage $image
	 * @param string|null      $filename
	 * @param string|null      $mime_type
	 * @return array|WP_Error {
	 *     Array on success or WP_Error if the file failed to save.
	 *
	 *     @type string $path      Path to the image file.
	 *     @type string $file      Name of the image file.
	 *     @type int    $width     Image width.
	 *     @type int    $height    Image height.
	 *     @type string $mime-type The mime type of the image.
	 *     @type int    $filesize  File size of the image.
	 * }
	 */
	protected function _save( $image, $filename = null, $mime_type = null ) {
		list( $filename, $extension, $mime_type ) = $this->get_output_format( $filename, $mime_type );

		if ( ! $filename ) {
			$filename = $this->generate_filename( null, null, $extension );
		}

		if ( function_exists( 'imageinterlace' ) ) {
			/**
			 * Filters whether to output progressive images (if available).
			 *
			 * @since 6.5.0
			 *
			 * @param bool   $interlace Whether to use progressive images for output if available. Default false.
			 * @param string $mime_type The mime type being saved.
			 */
			imageinterlace( $image, apply_filters( 'image_save_progressive', false, $mime_type ) );
		}

		if ( 'image/gif' === $mime_type ) {
			if ( ! $this->make_image( $filename, 'imagegif', array( $image, $filename ) ) ) {
				return new WP_Error( 'image_save_error', __( 'Image Editor Save Failed' ) );
			}
		} elseif ( 'image/png' === $mime_type ) {
			// Convert from full colors to index colors, like original PNG.
			if ( function_exists( 'imageistruecolor' ) && ! imageistruecolor( $image ) ) {
				imagetruecolortopalette( $image, false, imagecolorstotal( $image ) );
			}

			if ( ! $this->make_image( $filename, 'imagepng', array( $image, $filename ) ) ) {
				return new WP_Error( 'image_save_error', __( 'Image Editor Save Failed' ) );
			}
		} elseif ( 'image/jpeg' === $mime_type ) {
			if ( ! $this->make_image( $filename, 'imagejpeg', array( $image, $filename, $this->get_quality() ) ) ) {
				return new WP_Error( 'image_save_error', __( 'Image Editor Save Failed' ) );
			}
		} elseif ( 'image/webp' === $mime_type ) {
			if ( ! function_exists( 'imagewebp' )
				|| ! $this->make_image( $filename, 'imagewebp', array( $image, $filename, $this->get_quality() ) )
			) {
				return new WP_Error( 'image_save_error', __( 'Image Editor Save Failed' ) );
			}
		} elseif ( 'image/avif' === $mime_type ) {
			if ( ! function_exists( 'imageavif' )
				|| ! $this->make_image( $filename, 'imageavif', array( $image, $filename, $this->get_quality() ) )
			) {
				return new WP_Error( 'image_save_error', __( 'Image Editor Save Failed' ) );
			}
		} else {
			return new WP_Error( 'image_save_error', __( 'Image Editor Save Failed' ) );
		}

		// Set correct file permissions.
		$stat  = stat( dirname( $filename ) );
		$perms = $stat['mode'] & 0000666; // Same permissions as parent folder, strip off the executable bits.
		chmod( $filename, $perms );

		return array(
			'path'      => $filename,
			/**
			 * Filters the name of the saved image file.
			 *
			 * @since 2.6.0
			 *
			 * @param string $filename Name of the file.
			 */
			'file'      => wp_basename( apply_filters( 'image_make_intermediate_size', $filename ) ),
			'width'     => $this->size['width'],
			'height'    => $this->size['height'],
			'mime-type' => $mime_type,
			'filesize'  => wp_filesize( $filename ),
		);
	}

	/**
	 * Sets Image Compression quality on a 1-100% scale. Handles WebP lossless images.
	 *
	 * @since 6.7.0
	 * @since 6.8.0 The `$dims` parameter was added.
	 *
	 * @param int   $quality Compression Quality. Range: [1,100]
	 * @param array $dims    Optional. Image dimensions array with 'width' and 'height' keys.
	 * @return true|WP_Error True if set successfully; WP_Error on failure.
	 */
	public function set_quality( $quality = null, $dims = array() ) {
		$quality_result = parent::set_quality( $quality, $dims );
		if ( is_wp_error( $quality_result ) ) {
			return $quality_result;
		} else {
			$quality = $this->get_quality();
		}

		// Handle setting the quality for WebP lossless images, see https://php.watch/versions/8.1/gd-webp-lossless.
		try {
			if ( 'image/webp' === $this->mime_type && defined( 'IMG_WEBP_LOSSLESS' ) ) {
				$webp_info = wp_get_webp_info( $this->file );
				if ( ! empty( $webp_info['type'] ) && 'lossless' === $webp_info['type'] ) {
					$quality = IMG_WEBP_LOSSLESS;
					parent::set_quality( $quality, $dims );
				}
			}
		} catch ( Exception $e ) {
			return new WP_Error( 'image_quality_error', $e->getMessage() );
		}
		$this->quality = $quality;
		return true;
	}

	/**
	 * Returns stream of current image.
	 *
	 * @since 3.5.0
	 *
	 * @param string $mime_type The mime type of the image.
	 * @return bool True on success, false on failure.
	 */
	public function stream( $mime_type = null ) {
		list( $filename, $extension, $mime_type ) = $this->get_output_format( null, $mime_type );

		switch ( $mime_type ) {
			case 'image/png':
				header( 'Content-Type: image/png' );
				return imagepng( $this->image );
			case 'image/gif':
				header( 'Content-Type: image/gif' );
				return imagegif( $this->image );
			case 'image/webp':
				if ( function_exists( 'imagewebp' ) ) {
					header( 'Content-Type: image/webp' );
					return imagewebp( $this->image, null, $this->get_quality() );
				} else {
					// Fall back to JPEG.
					header( 'Content-Type: image/jpeg' );
					return imagejpeg( $this->image, null, $this->get_quality() );
				}
			case 'image/avif':
				if ( function_exists( 'imageavif' ) ) {
					header( 'Content-Type: image/avif' );
					return imageavif( $this->image, null, $this->get_quality() );
				}
				// Fall back to JPEG.
			default:
				header( 'Content-Type: image/jpeg' );
				return imagejpeg( $this->image, null, $this->get_quality() );
		}
	}

	/**
	 * Either calls editor's save function or handles file as a stream.
	 *
	 * @since 3.5.0
	 *
	 * @param string   $filename
	 * @param callable $callback
	 * @param array    $arguments
	 * @return bool
	 */
	protected function make_image( $filename, $callback, $arguments ) {
		if ( wp_is_stream( $filename ) ) {
			$arguments[1] = null;
		}

		return parent::make_image( $filename, $callback, $arguments );
	}
}