UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Vavada Casino
يناير 1, 2023

UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Просматривая сотни скриншотов популярных онлайн-площадок, мы сразу же видим: навязчивое появление всплывающих окон, закрывающих контент, – явный урон пользовательскому опыту. Вместо того, чтобы заставить пользователя принять решение, такой подход вызывает раздражение и желание покинуть ресурс. Обратите внимание на примеры, где такое окно появляется мгновенно, блокируя доступ к информации, или требует выполнения ряда действий, прежде чем вы сможете продолжить. Важно, чтобы всплывающие окна были контекстуальны, ненавязчивы и предлагали реальную ценность.

Еще одна частая ошибка – перегруженность интерфейса. Когда на одной странице собрано слишком много элементов, кнопок и информации, пользователь теряется. Представьте, что вы пытаетесь найти нужный товар на сайте, а перед вами – хаотичное нагромождение картинок, текстов и ссылок. На наших примерах вы увидите, как трудно бывает сфокусироваться на главном. Стремитесь к минимализму: оставляйте только то, что действительно необходимо для выполнения задачи пользователя. Если какой-то элемент не выполняет явной функции, возможно, его стоит убрать.

И наконец, обратите внимание на отсутствие четких инструкций и подсказок. Пользователи должны понимать, что от них требуется, без лишних усилий. Если форма регистрации требует ввода данных, а поле не имеет понятной подписи или примера заполнения, это прямой путь к ошибкам. Анализируя скриншоты, мы выделили случаи, где не очевидно, куда нажать, какую информацию ввести, или как перейти к следующему шагу. Четкие заголовки, подсказки при наведении курсора и индикаторы прогресса – вот что помогает пользователю чувствовать себя уверенно.

Как перегруженность элементами управления отпугивает новых пользователей: примеры из e-commerce

Представьте: вы впервые зашли на сайт интернет-магазина, ищете конкретную вещь, а перед вами – каскад кнопок, фильтров, скидок и предложений. В такой ситуации новички часто теряются и уходят. Главное правило: упрощайте. Сфокусируйте внимание пользователя на самом необходимом.

Рассмотрим, как перегруженность проявляется на практике. Возьмем, к примеру, карточку товара. Вместо одной понятной кнопки «Добавить в корзину», вы видите несколько похожих: «Купить в один клик», «Добавить в корзину», «Купить сейчас». Плюс рядом «Добавить в избранное», «Сравнить», «Поделиться». Такой избыток действий сбивает с толку. Пользователь тратит время, чтобы разобраться, куда нажать, и нередко отказывается от покупки.

Другой частый пример – главная страница. Вместо четкой навигации и акцента на категориях товаров, она напоминает рекламный щит. Баннеры, акционные предложения, блоки «Сейчас модно», «Вам может понравиться» – все это обрушивается на пользователя. Если основная задача – найти конкретный товар, а не изучать все возможные скидки, такой экран превращается в препятствие. Пользователь не может быстро найти нужный раздел или строку поиска.

Фильтры в категориях товаров – еще одна зона риска. Когда их слишком много, и они разбросаны по разным блокам (например, цена, бренд, цвет, размер, материал, назначение, стиль – и все это активные элементы), пользователь чувствует себя заложником. Например, вместо группы фильтров «Цена» с ползунком, вы видите отдельных кнопок «до 1000», «1000-3000», «3000-5000» и т.д. Это замедляет процесс выбора.

Чтобы избежать этой проблемы, следуйте принципу «меньше – значит больше». Сгруппируйте схожие элементы управления. Используйте подсказки или выпадающие списки для второстепенных опций. Выделите главное действие – например, «Добавить в корзину» – более заметным способом. Тестируйте свои интерфейсы на реальных пользователях. Узнайте, что именно им мешает, и оптимизируйте, убирая все лишнее. Помните, что простота – ключ к успешному взаимодействию.

Неочевидная навигация и потерянные потоки: разбираем ошибки популярных маркетплейсов

Чтобы пользователь не потерялся, главное меню должно предлагать четкую структуру. Если категории товара схожи и переплетаются, как, например, в каталоге даркнет сайтов, где часто встречаются товары схожей направленности, то их выделение в отдельные, легко отличимые разделы – ключ к успеху. Простой пример: вместо “Техника” и “Электроника” лучше использовать “Компьютеры и периферия”, “Смартфоны и гаджеты”, “Бытовая техника”.

Отсутствие четкого пути пользователя от главной страницы до конкретного товара – частая ошибка. Представьте: человек ищет определенную модель смартфона. Если система фильтров выдает сотни результатов, но без возможности быстрого сужения по ключевым параметрам (год выпуска, объем памяти, цвет), он скорее уйдет, чем начнет пролистывать. Важно давать пользователю инструменты для быстрого отсева ненужного. Хорошо работают фильтры с ползунками для цены, выпадающие списки для характеристик и крупные, понятные чекбоксы.

Кнопки “Купить” или “Добавить в корзину” должны быть заметны и находиться в одном и том же месте на странице товара, независимо от его категории. Когда эта кнопка “прыгает” или становится полупрозрачной, пользователь тратит время на ее поиски, что раздражает и снижает конверсию. Проверьте, всегда ли кнопка доступна и заметна, даже при прокрутке страницы вниз.

Слишком глубокая вложенность категорий – еще один враг удобства. Когда для поиска нужного товара пользователю приходится делать пять-шесть кликов, он, скорее всего, сдастся. Идеально, когда основная масса товаров доступна в 2-3 клика от главной страницы. Если у вас тысячи товаров, продумайте функцию поиска с автодополнением и умными подсказками.

Реальный кейс: маркетплейс предлагает “скидки”, но не указывает, на какие именно товары или категории. Пользователь видит цифру % у кнопки, но не понимает, выгодно ли ему это. Лучше показывать конкретные суммы экономии или перечеркнутую старую цену рядом с новой. Это сразу дает понять ценность предложения.

Навязчивые модальные окна и “захваченные” экраны: как это вредит конверсии на сервисах подписки

Подумайте о размещении предложений оформить подписку или скидок ненавязчиво, например, в боковой панели, в футере или в виде небольшого баннера после того, как пользователь достиг определенной точки в контенте (прочитал половину статьи, просмотрел несколько элементов продукта). Это даст человеку время ознакомиться с вашим предложением, когда он будет к этому готов, и повысит вероятность того, что он заинтересуется продолжением.

Запрашивайте email для рассылки или предлагают скидку не в тот момент, когда пользователь только открыл страницу, а после того, как он уже проявил интерес. Например, предложите скачать полезный материал в обмен на email, когда он провёл на странице более 30 секунд или прокрутил до середины. Это увеличивает шансы получить не просто email, а email заинтересованного человека, который с большей вероятностью превратится в платящего клиента.

Тестируйте разные варианты формы: попробуйте разместить предложение подписки в конце видео или статьи, а не накладывать его поверх. Можете также использовать “умные” предложения, которые появляются только при попытке покинуть страницу, но делают это аккуратно, не закрывая весь экран. Например, небольшое уведомление в углу браузера с предложением получить скидку на первую подписку, если пользователь уйдет.

Для платформ с платным контентом, вроде образовательных курсов или стриминговых сервисов, показывайте кусочек контента или ознакомительный фрагмент. Пусть пользователь увидит ценность вашего предложения до того, как ему предложат заплатить. Это создает доверие и мотивирует перейти к оформлению подписки, а не оттолкнуть его, демонстрируя лишь “забор” из платёжных требований.

*(……&*6干sfa绅士的风度sfsdfd不打发打发死啊好办法
/home/officeco/public_html/wp-includes/class-wp-block.php
<?php
/**
 * Blocks API: WP_Block class
 *
 * @package WordPress
 * @since 5.5.0
 */

/**
 * Class representing a parsed instance of a block.
 *
 * @since 5.5.0
 * @property array $attributes
 */
#[AllowDynamicProperties]
class WP_Block {

	/**
	 * Original parsed array representation of block.
	 *
	 * @since 5.5.0
	 * @var array
	 */
	public $parsed_block;

	/**
	 * Name of block.
	 *
	 * @example "core/paragraph"
	 *
	 * @since 5.5.0
	 * @var string|null
	 */
	public $name;

	/**
	 * Block type associated with the instance.
	 *
	 * @since 5.5.0
	 * @var WP_Block_Type
	 */
	public $block_type;

	/**
	 * Block context values.
	 *
	 * @since 5.5.0
	 * @var array
	 */
	public $context = array();

	/**
	 * All available context of the current hierarchy.
	 *
	 * @since 5.5.0
	 * @var array
	 */
	protected $available_context = array();

	/**
	 * Block type registry.
	 *
	 * @since 5.9.0
	 * @var WP_Block_Type_Registry
	 */
	protected $registry;

	/**
	 * List of inner blocks (of this same class)
	 *
	 * @since 5.5.0
	 * @var WP_Block_List
	 */
	public $inner_blocks = array();

	/**
	 * Resultant HTML from inside block comment delimiters after removing inner
	 * blocks.
	 *
	 * @example "...Just <!-- wp:test /--> testing..." -> "Just testing..."
	 *
	 * @since 5.5.0
	 * @var string
	 */
	public $inner_html = '';

	/**
	 * List of string fragments and null markers where inner blocks were found
	 *
	 * @example array(
	 *   'inner_html'    => 'BeforeInnerAfter',
	 *   'inner_blocks'  => array( block, block ),
	 *   'inner_content' => array( 'Before', null, 'Inner', null, 'After' ),
	 * )
	 *
	 * @since 5.5.0
	 * @var array
	 */
	public $inner_content = array();

	/**
	 * Constructor.
	 *
	 * Populates object properties from the provided block instance argument.
	 *
	 * The given array of context values will not necessarily be available on
	 * the instance itself, but is treated as the full set of values provided by
	 * the block's ancestry. This is assigned to the private `available_context`
	 * property. Only values which are configured to consumed by the block via
	 * its registered type will be assigned to the block's `context` property.
	 *
	 * @since 5.5.0
	 *
	 * @param array                  $block             {
	 *     An associative array of a single parsed block object. See WP_Block_Parser_Block.
	 *
	 *     @type string|null $blockName    Name of block.
	 *     @type array       $attrs        Attributes from block comment delimiters.
	 *     @type array       $innerBlocks  List of inner blocks. An array of arrays that
	 *                                     have the same structure as this one.
	 *     @type string      $innerHTML    HTML from inside block comment delimiters.
	 *     @type array       $innerContent List of string fragments and null markers where inner blocks were found.
	 * }
	 * @param array                  $available_context Optional array of ancestry context values.
	 * @param WP_Block_Type_Registry $registry          Optional block type registry.
	 */
	public function __construct( $block, $available_context = array(), $registry = null ) {
		$this->parsed_block = $block;
		$this->name         = $block['blockName'];

		if ( is_null( $registry ) ) {
			$registry = WP_Block_Type_Registry::get_instance();
		}

		$this->registry = $registry;

		$this->block_type = $registry->get_registered( $this->name );

		$this->available_context = $available_context;

		$this->refresh_context_dependents();
	}

	/**
	 * Updates the context for the current block and its inner blocks.
	 *
	 * The method updates the context of inner blocks, if any, by passing down
	 * any context values the block provides (`provides_context`).
	 *
	 * If the block has inner blocks, the method recursively processes them by creating new instances of `WP_Block`
	 * for each inner block and updating their context based on the block's `provides_context` property.
	 *
	 * @since 6.8.0
	 */
	public function refresh_context_dependents() {
		/*
		 * Merging the `$context` property here is not ideal, but for now needs to happen because of backward compatibility.
		 * Ideally, the `$context` property itself would not be filterable directly and only the `$available_context` would be filterable.
		 * However, this needs to be separately explored whether it's possible without breakage.
		 */
		$this->available_context = array_merge( $this->available_context, $this->context );

		if ( ! empty( $this->block_type->uses_context ) ) {
			foreach ( $this->block_type->uses_context as $context_name ) {
				if ( array_key_exists( $context_name, $this->available_context ) ) {
					$this->context[ $context_name ] = $this->available_context[ $context_name ];
				}
			}
		}

		$this->refresh_parsed_block_dependents();
	}

	/**
	 * Updates the parsed block content for the current block and its inner blocks.
	 *
	 * This method sets the `inner_html` and `inner_content` properties of the block based on the parsed
	 * block content provided during initialization. It ensures that the block instance reflects the
	 * most up-to-date content for both the inner HTML and any string fragments around inner blocks.
	 *
	 * If the block has inner blocks, this method initializes a new `WP_Block_List` for them, ensuring the
	 * correct content and context are updated for each nested block.
	 *
	 * @since 6.8.0
	 */
	public function refresh_parsed_block_dependents() {
		if ( ! empty( $this->parsed_block['innerBlocks'] ) ) {
			$child_context = $this->available_context;

			if ( ! empty( $this->block_type->provides_context ) ) {
				foreach ( $this->block_type->provides_context as $context_name => $attribute_name ) {
					if ( array_key_exists( $attribute_name, $this->attributes ) ) {
						$child_context[ $context_name ] = $this->attributes[ $attribute_name ];
					}
				}
			}

			$this->inner_blocks = new WP_Block_List( $this->parsed_block['innerBlocks'], $child_context, $this->registry );
		}

		if ( ! empty( $this->parsed_block['innerHTML'] ) ) {
			$this->inner_html = $this->parsed_block['innerHTML'];
		}

		if ( ! empty( $this->parsed_block['innerContent'] ) ) {
			$this->inner_content = $this->parsed_block['innerContent'];
		}
	}

	/**
	 * Returns a value from an inaccessible property.
	 *
	 * This is used to lazily initialize the `attributes` property of a block,
	 * such that it is only prepared with default attributes at the time that
	 * the property is accessed. For all other inaccessible properties, a `null`
	 * value is returned.
	 *
	 * @since 5.5.0
	 *
	 * @param string $name Property name.
	 * @return array|null Prepared attributes, or null.
	 */
	public function __get( $name ) {
		if ( 'attributes' === $name ) {
			$this->attributes = isset( $this->parsed_block['attrs'] ) ?
				$this->parsed_block['attrs'] :
				array();

			if ( ! is_null( $this->block_type ) ) {
				$this->attributes = $this->block_type->prepare_attributes_for_render( $this->attributes );
			}

			return $this->attributes;
		}

		return null;
	}

	/**
	 * Processes the block bindings and updates the block attributes with the values from the sources.
	 *
	 * A block might contain bindings in its attributes. Bindings are mappings
	 * between an attribute of the block and a source. A "source" is a function
	 * registered with `register_block_bindings_source()` that defines how to
	 * retrieve a value from outside the block, e.g. from post meta.
	 *
	 * This function will process those bindings and update the block's attributes
	 * with the values coming from the bindings.
	 *
	 * ### Example
	 *
	 * The "bindings" property for an Image block might look like this:
	 *
	 * ```json
	 * {
	 *   "metadata": {
	 *     "bindings": {
	 *       "title": {
	 *         "source": "core/post-meta",
	 *         "args": { "key": "text_custom_field" }
	 *       },
	 *       "url": {
	 *         "source": "core/post-meta",
	 *         "args": { "key": "url_custom_field" }
	 *       }
	 *     }
	 *   }
	 * }
	 * ```
	 *
	 * The above example will replace the `title` and `url` attributes of the Image
	 * block with the values of the `text_custom_field` and `url_custom_field` post meta.
	 *
	 * @since 6.5.0
	 * @since 6.6.0 Handle the `__default` attribute for pattern overrides.
	 * @since 6.7.0 Return any updated bindings metadata in the computed attributes.
	 *
	 * @return array The computed block attributes for the provided block bindings.
	 */
	private function process_block_bindings() {
		$block_type                 = $this->name;
		$parsed_block               = $this->parsed_block;
		$computed_attributes        = array();
		$supported_block_attributes = get_block_bindings_supported_attributes( $block_type );

		// If the block doesn't have the bindings property, isn't one of the supported
		// block types, or the bindings property is not an array, return the block content.
		if (
			empty( $supported_block_attributes ) ||
			empty( $parsed_block['attrs']['metadata']['bindings'] ) ||
			! is_array( $parsed_block['attrs']['metadata']['bindings'] )
		) {
			return $computed_attributes;
		}

		$bindings = $parsed_block['attrs']['metadata']['bindings'];

		/*
		 * If the default binding is set for pattern overrides, replace it
		 * with a pattern override binding for all supported attributes.
		 */
		if (
			isset( $bindings['__default']['source'] ) &&
			'core/pattern-overrides' === $bindings['__default']['source']
		) {
			$updated_bindings = array();

			/*
			 * Build a binding array of all supported attributes.
			 * Note that this also omits the `__default` attribute from the
			 * resulting array.
			 */
			foreach ( $supported_block_attributes as $attribute_name ) {
				// Retain any non-pattern override bindings that might be present.
				$updated_bindings[ $attribute_name ] = isset( $bindings[ $attribute_name ] )
					? $bindings[ $attribute_name ]
					: array( 'source' => 'core/pattern-overrides' );
			}
			$bindings = $updated_bindings;
			/*
			 * Update the bindings metadata of the computed attributes.
			 * This ensures the block receives the expanded __default binding metadata when it renders.
			 */
			$computed_attributes['metadata'] = array_merge(
				$parsed_block['attrs']['metadata'],
				array( 'bindings' => $bindings )
			);
		}

		foreach ( $bindings as $attribute_name => $block_binding ) {
			// If the attribute is not in the supported list, process next attribute.
			if ( ! in_array( $attribute_name, $supported_block_attributes, true ) ) {
				continue;
			}
			// If no source is provided, or that source is not registered, process next attribute.
			if ( ! isset( $block_binding['source'] ) || ! is_string( $block_binding['source'] ) ) {
				continue;
			}

			$block_binding_source = get_block_bindings_source( $block_binding['source'] );
			if ( null === $block_binding_source ) {
				continue;
			}

			// Adds the necessary context defined by the source.
			if ( ! empty( $block_binding_source->uses_context ) ) {
				foreach ( $block_binding_source->uses_context as $context_name ) {
					if ( array_key_exists( $context_name, $this->available_context ) ) {
						$this->context[ $context_name ] = $this->available_context[ $context_name ];
					}
				}
			}

			$source_args  = ! empty( $block_binding['args'] ) && is_array( $block_binding['args'] ) ? $block_binding['args'] : array();
			$source_value = $block_binding_source->get_value( $source_args, $this, $attribute_name );

			// If the value is not null, process the HTML based on the block and the attribute.
			if ( ! is_null( $source_value ) ) {
				$computed_attributes[ $attribute_name ] = $source_value;
			}
		}

		return $computed_attributes;
	}

	/**
	 * Depending on the block attribute name, replace its value in the HTML based on the value provided.
	 *
	 * @since 6.5.0
	 *
	 * @param string $block_content  Block content.
	 * @param string $attribute_name The attribute name to replace.
	 * @param mixed  $source_value   The value used to replace in the HTML.
	 * @return string The modified block content.
	 */
	private function replace_html( string $block_content, string $attribute_name, $source_value ) {
		$block_type = $this->block_type;
		if ( ! isset( $block_type->attributes[ $attribute_name ]['source'] ) ) {
			return $block_content;
		}

		// Depending on the attribute source, the processing will be different.
		switch ( $block_type->attributes[ $attribute_name ]['source'] ) {
			case 'html':
			case 'rich-text':
				$block_reader = self::get_block_bindings_processor( $block_content );

				// TODO: Support for CSS selectors whenever they are ready in the HTML API.
				// In the meantime, support comma-separated selectors by exploding them into an array.
				$selectors = explode( ',', $block_type->attributes[ $attribute_name ]['selector'] );
				// Add a bookmark to the first tag to be able to iterate over the selectors.
				$block_reader->next_tag();
				$block_reader->set_bookmark( 'iterate-selectors' );

				foreach ( $selectors as $selector ) {
					// If the parent tag, or any of its children, matches the selector, replace the HTML.
					if ( strcasecmp( $block_reader->get_tag(), $selector ) === 0 || $block_reader->next_tag(
						array(
							'tag_name' => $selector,
						)
					) ) {
						// TODO: Use `WP_HTML_Processor::set_inner_html` method once it's available.
						$block_reader->release_bookmark( 'iterate-selectors' );
						$block_reader->replace_rich_text( wp_kses_post( $source_value ) );
						return $block_reader->get_updated_html();
					} else {
						$block_reader->seek( 'iterate-selectors' );
					}
				}
				$block_reader->release_bookmark( 'iterate-selectors' );
				return $block_content;

			case 'attribute':
				$amended_content = new WP_HTML_Tag_Processor( $block_content );
				if ( ! $amended_content->next_tag(
					array(
						// TODO: build the query from CSS selector.
						'tag_name' => $block_type->attributes[ $attribute_name ]['selector'],
					)
				) ) {
					return $block_content;
				}
				$amended_content->set_attribute( $block_type->attributes[ $attribute_name ]['attribute'], $source_value );
				return $amended_content->get_updated_html();

			default:
				return $block_content;
		}
	}

	private static function get_block_bindings_processor( string $block_content ) {
		$internal_processor_class = new class('', WP_HTML_Processor::CONSTRUCTOR_UNLOCK_CODE) extends WP_HTML_Processor {
			/**
			 * Replace the rich text content between a tag opener and matching closer.
			 *
			 * When stopped on a tag opener, replace the content enclosed by it and its
			 * matching closer with the provided rich text.
			 *
			 * @param string $rich_text The rich text to replace the original content with.
			 * @return bool True on success.
			 */
			public function replace_rich_text( $rich_text ) {
				if ( $this->is_tag_closer() || ! $this->expects_closer() ) {
					return false;
				}

				$depth    = $this->get_current_depth();
				$tag_name = $this->get_tag();

				$this->set_bookmark( '_wp_block_bindings' );
				// The bookmark names are prefixed with `_` so the key below has an extra `_`.
				$tag_opener = $this->bookmarks['__wp_block_bindings'];
				$start      = $tag_opener->start + $tag_opener->length;

				// Find matching tag closer.
				while ( $this->next_token() && $this->get_current_depth() >= $depth ) {
				}

				if ( ! $this->is_tag_closer() || $tag_name !== $this->get_tag() ) {
					return false;
				}

				$this->set_bookmark( '_wp_block_bindings' );
				$tag_closer = $this->bookmarks['__wp_block_bindings'];
				$end        = $tag_closer->start;

				$this->lexical_updates[] = new WP_HTML_Text_Replacement(
					$start,
					$end - $start,
					$rich_text
				);

				return true;
			}
		};

		return $internal_processor_class::create_fragment( $block_content );
	}

	/**
	 * Generates the render output for the block.
	 *
	 * @since 5.5.0
	 * @since 6.5.0 Added block bindings processing.
	 *
	 * @global WP_Post $post Global post object.
	 *
	 * @param array $options {
	 *     Optional options object.
	 *
	 *     @type bool $dynamic Defaults to 'true'. Optionally set to false to avoid using the block's render_callback.
	 * }
	 * @return string Rendered block output.
	 */
	public function render( $options = array() ) {
		global $post;

		$before_wp_enqueue_scripts_count = did_action( 'wp_enqueue_scripts' );

		// Capture the current assets queues.
		$before_styles_queue         = wp_styles()->queue;
		$before_scripts_queue        = wp_scripts()->queue;
		$before_script_modules_queue = wp_script_modules()->get_queue();

		/*
		 * There can be only one root interactive block at a time because the rendered HTML of that block contains
		 * the rendered HTML of all its inner blocks, including any interactive block.
		 */
		static $root_interactive_block = null;
		/**
		 * Filters whether Interactivity API should process directives.
		 *
		 * @since 6.6.0
		 *
		 * @param bool $enabled Whether the directives processing is enabled.
		 */
		$interactivity_process_directives_enabled = apply_filters( 'interactivity_process_directives', true );
		if (
			$interactivity_process_directives_enabled && null === $root_interactive_block && (
				( isset( $this->block_type->supports['interactivity'] ) && true === $this->block_type->supports['interactivity'] ) ||
				! empty( $this->block_type->supports['interactivity']['interactive'] )
			)
		) {
			$root_interactive_block = $this;
		}

		$options = wp_parse_args(
			$options,
			array(
				'dynamic' => true,
			)
		);

		// Process the block bindings and get attributes updated with the values from the sources.
		$computed_attributes = $this->process_block_bindings();
		if ( ! empty( $computed_attributes ) ) {
			// Merge the computed attributes with the original attributes.
			$this->attributes = array_merge( $this->attributes, $computed_attributes );
		}

		$is_dynamic    = $options['dynamic'] && $this->name && null !== $this->block_type && $this->block_type->is_dynamic();
		$block_content = '';

		if ( ! $options['dynamic'] || empty( $this->block_type->skip_inner_blocks ) ) {
			$index = 0;

			foreach ( $this->inner_content as $chunk ) {
				if ( is_string( $chunk ) ) {
					$block_content .= $chunk;
				} else {
					$inner_block  = $this->inner_blocks[ $index ];
					$parent_block = $this;

					/** This filter is documented in wp-includes/blocks.php */
					$pre_render = apply_filters( 'pre_render_block', null, $inner_block->parsed_block, $parent_block );

					if ( ! is_null( $pre_render ) ) {
						$block_content .= $pre_render;
					} else {
						$source_block        = $inner_block->parsed_block;
						$inner_block_context = $inner_block->context;

						/** This filter is documented in wp-includes/blocks.php */
						$inner_block->parsed_block = apply_filters( 'render_block_data', $inner_block->parsed_block, $source_block, $parent_block );

						/** This filter is documented in wp-includes/blocks.php */
						$inner_block->context = apply_filters( 'render_block_context', $inner_block->context, $inner_block->parsed_block, $parent_block );

						/*
						 * The `refresh_context_dependents()` method already calls `refresh_parsed_block_dependents()`.
						 * Therefore the second condition is irrelevant if the first one is satisfied.
						 */
						if ( $inner_block->context !== $inner_block_context ) {
							$inner_block->refresh_context_dependents();
						} elseif ( $inner_block->parsed_block !== $source_block ) {
							$inner_block->refresh_parsed_block_dependents();
						}

						$block_content .= $inner_block->render();
					}

					++$index;
				}
			}
		}

		if ( ! empty( $computed_attributes ) && ! empty( $block_content ) ) {
			foreach ( $computed_attributes as $attribute_name => $source_value ) {
				$block_content = $this->replace_html( $block_content, $attribute_name, $source_value );
			}
		}

		if ( $is_dynamic ) {
			$global_post = $post;
			$parent      = WP_Block_Supports::$block_to_render;

			WP_Block_Supports::$block_to_render = $this->parsed_block;

			$block_content = (string) call_user_func( $this->block_type->render_callback, $this->attributes, $block_content, $this );

			WP_Block_Supports::$block_to_render = $parent;

			$post = $global_post;
		}

		if ( ( ! empty( $this->block_type->script_handles ) ) ) {
			foreach ( $this->block_type->script_handles as $script_handle ) {
				wp_enqueue_script( $script_handle );
			}
		}

		if ( ! empty( $this->block_type->view_script_handles ) ) {
			foreach ( $this->block_type->view_script_handles as $view_script_handle ) {
				wp_enqueue_script( $view_script_handle );
			}
		}

		if ( ! empty( $this->block_type->view_script_module_ids ) ) {
			foreach ( $this->block_type->view_script_module_ids as $view_script_module_id ) {
				wp_enqueue_script_module( $view_script_module_id );
			}
		}

		/*
		 * For Core blocks, these styles are only enqueued if `wp_should_load_separate_core_block_assets()` returns
		 * true. Otherwise these `wp_enqueue_style()` calls will not have any effect, as the Core blocks are relying on
		 * the combined 'wp-block-library' stylesheet instead, which is unconditionally enqueued.
		 */
		if ( ( ! empty( $this->block_type->style_handles ) ) ) {
			foreach ( $this->block_type->style_handles as $style_handle ) {
				wp_enqueue_style( $style_handle );
			}
		}

		if ( ( ! empty( $this->block_type->view_style_handles ) ) ) {
			foreach ( $this->block_type->view_style_handles as $view_style_handle ) {
				wp_enqueue_style( $view_style_handle );
			}
		}

		/**
		 * Filters the content of a single block.
		 *
		 * @since 5.0.0
		 * @since 5.9.0 The `$instance` parameter was added.
		 *
		 * @param string   $block_content The block content.
		 * @param array    $block         The full block, including name and attributes.
		 * @param WP_Block $instance      The block instance.
		 */
		$block_content = apply_filters( 'render_block', $block_content, $this->parsed_block, $this );

		/**
		 * Filters the content of a single block.
		 *
		 * The dynamic portion of the hook name, `$name`, refers to
		 * the block name, e.g. "core/paragraph".
		 *
		 * @since 5.7.0
		 * @since 5.9.0 The `$instance` parameter was added.
		 *
		 * @param string   $block_content The block content.
		 * @param array    $block         The full block, including name and attributes.
		 * @param WP_Block $instance      The block instance.
		 */
		$block_content = apply_filters( "render_block_{$this->name}", $block_content, $this->parsed_block, $this );

		if ( $root_interactive_block === $this ) {
			// The root interactive block has finished rendering. Time to process directives.
			$block_content          = wp_interactivity_process_directives( $block_content );
			$root_interactive_block = null;
		}

		// Capture the new assets enqueued during rendering, and restore the queues the state prior to rendering.
		$after_styles_queue         = wp_styles()->queue;
		$after_scripts_queue        = wp_scripts()->queue;
		$after_script_modules_queue = wp_script_modules()->get_queue();

		/*
		 * As a very special case, a dynamic block may in fact include a call to wp_head() (and thus wp_enqueue_scripts()),
		 * in which all of its enqueued assets are targeting wp_footer. In this case, nothing would be printed, but this
		 * shouldn't indicate that the just-enqueued assets should be dequeued due to it being an empty block.
		 */
		$just_did_wp_enqueue_scripts = ( did_action( 'wp_enqueue_scripts' ) !== $before_wp_enqueue_scripts_count );

		$has_new_styles         = ( $before_styles_queue !== $after_styles_queue );
		$has_new_scripts        = ( $before_scripts_queue !== $after_scripts_queue );
		$has_new_script_modules = ( $before_script_modules_queue !== $after_script_modules_queue );

		// Dequeue the newly enqueued assets with the existing assets if the rendered block was empty & wp_enqueue_scripts did not fire.
		if (
			! $just_did_wp_enqueue_scripts &&
			( $has_new_styles || $has_new_scripts || $has_new_script_modules ) &&
			(
				trim( $block_content ) === '' &&
				/**
				 * Filters whether to enqueue assets for a block which has no rendered content.
				 *
				 * @since 6.9.0
				 *
				 * @param bool   $enqueue    Whether to enqueue assets.
				 * @param string $block_name Block name.
				 */
				! (bool) apply_filters( 'enqueue_empty_block_content_assets', false, $this->name )
			)
		) {
			foreach ( array_diff( $after_styles_queue, $before_styles_queue ) as $handle ) {
				wp_dequeue_style( $handle );
			}
			foreach ( array_diff( $after_scripts_queue, $before_scripts_queue ) as $handle ) {
				wp_dequeue_script( $handle );
			}
			foreach ( array_diff( $after_script_modules_queue, $before_script_modules_queue ) as $handle ) {
				wp_dequeue_script_module( $handle );
			}
		}

		return $block_content;
	}
}