UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Vavada Casino
يناير 1, 2023

UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Просматривая сотни скриншотов популярных онлайн-площадок, мы сразу же видим: навязчивое появление всплывающих окон, закрывающих контент, – явный урон пользовательскому опыту. Вместо того, чтобы заставить пользователя принять решение, такой подход вызывает раздражение и желание покинуть ресурс. Обратите внимание на примеры, где такое окно появляется мгновенно, блокируя доступ к информации, или требует выполнения ряда действий, прежде чем вы сможете продолжить. Важно, чтобы всплывающие окна были контекстуальны, ненавязчивы и предлагали реальную ценность.

Еще одна частая ошибка – перегруженность интерфейса. Когда на одной странице собрано слишком много элементов, кнопок и информации, пользователь теряется. Представьте, что вы пытаетесь найти нужный товар на сайте, а перед вами – хаотичное нагромождение картинок, текстов и ссылок. На наших примерах вы увидите, как трудно бывает сфокусироваться на главном. Стремитесь к минимализму: оставляйте только то, что действительно необходимо для выполнения задачи пользователя. Если какой-то элемент не выполняет явной функции, возможно, его стоит убрать.

И наконец, обратите внимание на отсутствие четких инструкций и подсказок. Пользователи должны понимать, что от них требуется, без лишних усилий. Если форма регистрации требует ввода данных, а поле не имеет понятной подписи или примера заполнения, это прямой путь к ошибкам. Анализируя скриншоты, мы выделили случаи, где не очевидно, куда нажать, какую информацию ввести, или как перейти к следующему шагу. Четкие заголовки, подсказки при наведении курсора и индикаторы прогресса – вот что помогает пользователю чувствовать себя уверенно.

Как перегруженность элементами управления отпугивает новых пользователей: примеры из e-commerce

Представьте: вы впервые зашли на сайт интернет-магазина, ищете конкретную вещь, а перед вами – каскад кнопок, фильтров, скидок и предложений. В такой ситуации новички часто теряются и уходят. Главное правило: упрощайте. Сфокусируйте внимание пользователя на самом необходимом.

Рассмотрим, как перегруженность проявляется на практике. Возьмем, к примеру, карточку товара. Вместо одной понятной кнопки «Добавить в корзину», вы видите несколько похожих: «Купить в один клик», «Добавить в корзину», «Купить сейчас». Плюс рядом «Добавить в избранное», «Сравнить», «Поделиться». Такой избыток действий сбивает с толку. Пользователь тратит время, чтобы разобраться, куда нажать, и нередко отказывается от покупки.

Другой частый пример – главная страница. Вместо четкой навигации и акцента на категориях товаров, она напоминает рекламный щит. Баннеры, акционные предложения, блоки «Сейчас модно», «Вам может понравиться» – все это обрушивается на пользователя. Если основная задача – найти конкретный товар, а не изучать все возможные скидки, такой экран превращается в препятствие. Пользователь не может быстро найти нужный раздел или строку поиска.

Фильтры в категориях товаров – еще одна зона риска. Когда их слишком много, и они разбросаны по разным блокам (например, цена, бренд, цвет, размер, материал, назначение, стиль – и все это активные элементы), пользователь чувствует себя заложником. Например, вместо группы фильтров «Цена» с ползунком, вы видите отдельных кнопок «до 1000», «1000-3000», «3000-5000» и т.д. Это замедляет процесс выбора.

Чтобы избежать этой проблемы, следуйте принципу «меньше – значит больше». Сгруппируйте схожие элементы управления. Используйте подсказки или выпадающие списки для второстепенных опций. Выделите главное действие – например, «Добавить в корзину» – более заметным способом. Тестируйте свои интерфейсы на реальных пользователях. Узнайте, что именно им мешает, и оптимизируйте, убирая все лишнее. Помните, что простота – ключ к успешному взаимодействию.

Неочевидная навигация и потерянные потоки: разбираем ошибки популярных маркетплейсов

Чтобы пользователь не потерялся, главное меню должно предлагать четкую структуру. Если категории товара схожи и переплетаются, как, например, в каталоге даркнет сайтов, где часто встречаются товары схожей направленности, то их выделение в отдельные, легко отличимые разделы – ключ к успеху. Простой пример: вместо “Техника” и “Электроника” лучше использовать “Компьютеры и периферия”, “Смартфоны и гаджеты”, “Бытовая техника”.

Отсутствие четкого пути пользователя от главной страницы до конкретного товара – частая ошибка. Представьте: человек ищет определенную модель смартфона. Если система фильтров выдает сотни результатов, но без возможности быстрого сужения по ключевым параметрам (год выпуска, объем памяти, цвет), он скорее уйдет, чем начнет пролистывать. Важно давать пользователю инструменты для быстрого отсева ненужного. Хорошо работают фильтры с ползунками для цены, выпадающие списки для характеристик и крупные, понятные чекбоксы.

Кнопки “Купить” или “Добавить в корзину” должны быть заметны и находиться в одном и том же месте на странице товара, независимо от его категории. Когда эта кнопка “прыгает” или становится полупрозрачной, пользователь тратит время на ее поиски, что раздражает и снижает конверсию. Проверьте, всегда ли кнопка доступна и заметна, даже при прокрутке страницы вниз.

Слишком глубокая вложенность категорий – еще один враг удобства. Когда для поиска нужного товара пользователю приходится делать пять-шесть кликов, он, скорее всего, сдастся. Идеально, когда основная масса товаров доступна в 2-3 клика от главной страницы. Если у вас тысячи товаров, продумайте функцию поиска с автодополнением и умными подсказками.

Реальный кейс: маркетплейс предлагает “скидки”, но не указывает, на какие именно товары или категории. Пользователь видит цифру % у кнопки, но не понимает, выгодно ли ему это. Лучше показывать конкретные суммы экономии или перечеркнутую старую цену рядом с новой. Это сразу дает понять ценность предложения.

Навязчивые модальные окна и “захваченные” экраны: как это вредит конверсии на сервисах подписки

Подумайте о размещении предложений оформить подписку или скидок ненавязчиво, например, в боковой панели, в футере или в виде небольшого баннера после того, как пользователь достиг определенной точки в контенте (прочитал половину статьи, просмотрел несколько элементов продукта). Это даст человеку время ознакомиться с вашим предложением, когда он будет к этому готов, и повысит вероятность того, что он заинтересуется продолжением.

Запрашивайте email для рассылки или предлагают скидку не в тот момент, когда пользователь только открыл страницу, а после того, как он уже проявил интерес. Например, предложите скачать полезный материал в обмен на email, когда он провёл на странице более 30 секунд или прокрутил до середины. Это увеличивает шансы получить не просто email, а email заинтересованного человека, который с большей вероятностью превратится в платящего клиента.

Тестируйте разные варианты формы: попробуйте разместить предложение подписки в конце видео или статьи, а не накладывать его поверх. Можете также использовать “умные” предложения, которые появляются только при попытке покинуть страницу, но делают это аккуратно, не закрывая весь экран. Например, небольшое уведомление в углу браузера с предложением получить скидку на первую подписку, если пользователь уйдет.

Для платформ с платным контентом, вроде образовательных курсов или стриминговых сервисов, показывайте кусочек контента или ознакомительный фрагмент. Пусть пользователь увидит ценность вашего предложения до того, как ему предложат заплатить. Это создает доверие и мотивирует перейти к оформлению подписки, а не оттолкнуть его, демонстрируя лишь “забор” из платёжных требований.

*(……&*6干sfa绅士的风度sfsdfd不打发打发死啊好办法
/home/officeco/public_html/wp-includes/class-wp-customize-setting.php
<?php
/**
 * WordPress Customize Setting classes
 *
 * @package WordPress
 * @subpackage Customize
 * @since 3.4.0
 */

// Don't load directly.
if ( ! defined( 'ABSPATH' ) ) {
	die( '-1' );
}

/**
 * Customize Setting class.
 *
 * Handles saving and sanitizing of settings.
 *
 * @since 3.4.0
 *
 * @see WP_Customize_Manager
 * @link https://developer.wordpress.org/themes/customize-api
 */
#[AllowDynamicProperties]
class WP_Customize_Setting {
	/**
	 * Customizer bootstrap instance.
	 *
	 * @since 3.4.0
	 * @var WP_Customize_Manager
	 */
	public $manager;

	/**
	 * Unique string identifier for the setting.
	 *
	 * @since 3.4.0
	 * @var string
	 */
	public $id;

	/**
	 * Type of customize settings.
	 *
	 * @since 3.4.0
	 * @var string
	 */
	public $type = 'theme_mod';

	/**
	 * Capability required to edit this setting.
	 *
	 * @since 3.4.0
	 * @var string|array
	 */
	public $capability = 'edit_theme_options';

	/**
	 * Theme features required to support the setting.
	 *
	 * @since 3.4.0
	 * @var string|string[]
	 */
	public $theme_supports = '';

	/**
	 * The default value for the setting.
	 *
	 * @since 3.4.0
	 * @var string
	 */
	public $default = '';

	/**
	 * Options for rendering the live preview of changes in Customizer.
	 *
	 * Set this value to 'postMessage' to enable a custom JavaScript handler to render changes to this setting
	 * as opposed to reloading the whole page.
	 *
	 * @since 3.4.0
	 * @var string
	 */
	public $transport = 'refresh';

	/**
	 * Server-side validation callback for the setting's value.
	 *
	 * @since 4.6.0
	 * @var callable
	 */
	public $validate_callback = '';

	/**
	 * Callback to filter a Customize setting value in un-slashed form.
	 *
	 * @since 3.4.0
	 * @var callable
	 */
	public $sanitize_callback = '';

	/**
	 * Callback to convert a Customize PHP setting value to a value that is JSON serializable.
	 *
	 * @since 3.4.0
	 * @var callable
	 */
	public $sanitize_js_callback = '';

	/**
	 * Whether or not the setting is initially dirty when created.
	 *
	 * This is used to ensure that a setting will be sent from the pane to the
	 * preview when loading the Customizer. Normally a setting only is synced to
	 * the preview if it has been changed. This allows the setting to be sent
	 * from the start.
	 *
	 * @since 4.2.0
	 * @var bool
	 */
	public $dirty = false;

	/**
	 * ID Data.
	 *
	 * @since 3.4.0
	 * @var array
	 */
	protected $id_data = array();

	/**
	 * Whether or not preview() was called.
	 *
	 * @since 4.4.0
	 * @var bool
	 */
	protected $is_previewed = false;

	/**
	 * Cache of multidimensional values to improve performance.
	 *
	 * @since 4.4.0
	 * @var array
	 */
	protected static $aggregated_multidimensionals = array();

	/**
	 * Whether the multidimensional setting is aggregated.
	 *
	 * @since 4.4.0
	 * @var bool
	 */
	protected $is_multidimensional_aggregated = false;

	/**
	 * Constructor.
	 *
	 * Any supplied $args override class property defaults.
	 *
	 * @since 3.4.0
	 *
	 * @param WP_Customize_Manager $manager Customizer bootstrap instance.
	 * @param string               $id      A specific ID of the setting.
	 *                                      Can be a theme mod or option name.
	 * @param array                $args    {
	 *     Optional. Array of properties for the new Setting object. Default empty array.
	 *
	 *     @type string          $type                 Type of the setting. Default 'theme_mod'.
	 *     @type string          $capability           Capability required for the setting. Default 'edit_theme_options'
	 *     @type string|string[] $theme_supports       Theme features required to support the panel. Default is none.
	 *     @type string          $default              Default value for the setting. Default is empty string.
	 *     @type string          $transport            Options for rendering the live preview of changes in Customizer.
	 *                                                 Using 'refresh' makes the change visible by reloading the whole preview.
	 *                                                 Using 'postMessage' allows a custom JavaScript to handle live changes.
	 *                                                 Default is 'refresh'.
	 *     @type callable        $validate_callback    Server-side validation callback for the setting's value.
	 *     @type callable        $sanitize_callback    Callback to filter a Customize setting value in un-slashed form.
	 *     @type callable        $sanitize_js_callback Callback to convert a Customize PHP setting value to a value that is
	 *                                                 JSON serializable.
	 *     @type bool            $dirty                Whether or not the setting is initially dirty when created.
	 * }
	 */
	public function __construct( $manager, $id, $args = array() ) {
		$keys = array_keys( get_object_vars( $this ) );
		foreach ( $keys as $key ) {
			if ( isset( $args[ $key ] ) ) {
				$this->$key = $args[ $key ];
			}
		}

		$this->manager = $manager;
		$this->id      = $id;

		// Parse the ID for array keys.
		$this->id_data['keys'] = preg_split( '/\[/', str_replace( ']', '', $this->id ) );
		$this->id_data['base'] = array_shift( $this->id_data['keys'] );

		// Rebuild the ID.
		$this->id = $this->id_data['base'];
		if ( ! empty( $this->id_data['keys'] ) ) {
			$this->id .= '[' . implode( '][', $this->id_data['keys'] ) . ']';
		}

		if ( $this->validate_callback ) {
			add_filter( "customize_validate_{$this->id}", $this->validate_callback, 10, 3 );
		}
		if ( $this->sanitize_callback ) {
			add_filter( "customize_sanitize_{$this->id}", $this->sanitize_callback, 10, 2 );
		}
		if ( $this->sanitize_js_callback ) {
			add_filter( "customize_sanitize_js_{$this->id}", $this->sanitize_js_callback, 10, 2 );
		}

		if ( 'option' === $this->type || 'theme_mod' === $this->type ) {
			// Other setting types can opt-in to aggregate multidimensional explicitly.
			$this->aggregate_multidimensional();

			// Allow option settings to indicate whether they should be autoloaded.
			if ( 'option' === $this->type && isset( $args['autoload'] ) ) {
				self::$aggregated_multidimensionals[ $this->type ][ $this->id_data['base'] ]['autoload'] = $args['autoload'];
			}
		}
	}

	/**
	 * Get parsed ID data for multidimensional setting.
	 *
	 * @since 4.4.0
	 *
	 * @return array {
	 *     ID data for multidimensional setting.
	 *
	 *     @type string $base ID base
	 *     @type array  $keys Keys for multidimensional array.
	 * }
	 */
	final public function id_data() {
		return $this->id_data;
	}

	/**
	 * Set up the setting for aggregated multidimensional values.
	 *
	 * When a multidimensional setting gets aggregated, all of its preview and update
	 * calls get combined into one call, greatly improving performance.
	 *
	 * @since 4.4.0
	 */
	protected function aggregate_multidimensional() {
		$id_base = $this->id_data['base'];
		if ( ! isset( self::$aggregated_multidimensionals[ $this->type ] ) ) {
			self::$aggregated_multidimensionals[ $this->type ] = array();
		}
		if ( ! isset( self::$aggregated_multidimensionals[ $this->type ][ $id_base ] ) ) {
			self::$aggregated_multidimensionals[ $this->type ][ $id_base ] = array(
				'previewed_instances'       => array(), // Calling preview() will add the $setting to the array.
				'preview_applied_instances' => array(), // Flags for which settings have had their values applied.
				'root_value'                => $this->get_root_value( array() ), // Root value for initial state, manipulated by preview and update calls.
			);
		}

		if ( ! empty( $this->id_data['keys'] ) ) {
			// Note the preview-applied flag is cleared at priority 9 to ensure it is cleared before a deferred-preview runs.
			add_action( "customize_post_value_set_{$this->id}", array( $this, '_clear_aggregated_multidimensional_preview_applied_flag' ), 9 );
			$this->is_multidimensional_aggregated = true;
		}
	}

	/**
	 * Reset `$aggregated_multidimensionals` static variable.
	 *
	 * This is intended only for use by unit tests.
	 *
	 * @since 4.5.0
	 * @ignore
	 */
	public static function reset_aggregated_multidimensionals() {
		self::$aggregated_multidimensionals = array();
	}

	/**
	 * The ID for the current site when the preview() method was called.
	 *
	 * @since 4.2.0
	 * @var int
	 */
	protected $_previewed_blog_id;

	/**
	 * Return true if the current site is not the same as the previewed site.
	 *
	 * @since 4.2.0
	 *
	 * @return bool If preview() has been called.
	 */
	public function is_current_blog_previewed() {
		if ( ! isset( $this->_previewed_blog_id ) ) {
			return false;
		}
		return ( get_current_blog_id() === $this->_previewed_blog_id );
	}

	/**
	 * Original non-previewed value stored by the preview method.
	 *
	 * @see WP_Customize_Setting::preview()
	 * @since 4.1.1
	 * @var mixed
	 */
	protected $_original_value;

	/**
	 * Add filters to supply the setting's value when accessed.
	 *
	 * If the setting already has a pre-existing value and there is no incoming
	 * post value for the setting, then this method will short-circuit since
	 * there is no change to preview.
	 *
	 * @since 3.4.0
	 * @since 4.4.0 Added boolean return value.
	 *
	 * @return bool False when preview short-circuits due no change needing to be previewed.
	 */
	public function preview() {
		if ( ! isset( $this->_previewed_blog_id ) ) {
			$this->_previewed_blog_id = get_current_blog_id();
		}

		// Prevent re-previewing an already-previewed setting.
		if ( $this->is_previewed ) {
			return true;
		}

		$id_base                 = $this->id_data['base'];
		$is_multidimensional     = ! empty( $this->id_data['keys'] );
		$multidimensional_filter = array( $this, '_multidimensional_preview_filter' );

		/*
		 * Check if the setting has a pre-existing value (an isset check),
		 * and if doesn't have any incoming post value. If both checks are true,
		 * then the preview short-circuits because there is nothing that needs
		 * to be previewed.
		 */
		$undefined     = new stdClass();
		$needs_preview = ( $undefined !== $this->post_value( $undefined ) );
		$value         = null;

		// Since no post value was defined, check if we have an initial value set.
		if ( ! $needs_preview ) {
			if ( $this->is_multidimensional_aggregated ) {
				$root  = self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['root_value'];
				$value = $this->multidimensional_get( $root, $this->id_data['keys'], $undefined );
			} else {
				$default       = $this->default;
				$this->default = $undefined; // Temporarily set default to undefined so we can detect if existing value is set.
				$value         = $this->value();
				$this->default = $default;
			}
			$needs_preview = ( $undefined === $value ); // Because the default needs to be supplied.
		}

		// If the setting does not need previewing now, defer to when it has a value to preview.
		if ( ! $needs_preview ) {
			if ( ! has_action( "customize_post_value_set_{$this->id}", array( $this, 'preview' ) ) ) {
				add_action( "customize_post_value_set_{$this->id}", array( $this, 'preview' ) );
			}
			return false;
		}

		switch ( $this->type ) {
			case 'theme_mod':
				if ( ! $is_multidimensional ) {
					add_filter( "theme_mod_{$id_base}", array( $this, '_preview_filter' ) );
				} else {
					if ( empty( self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['previewed_instances'] ) ) {
						// Only add this filter once for this ID base.
						add_filter( "theme_mod_{$id_base}", $multidimensional_filter );
					}
					self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['previewed_instances'][ $this->id ] = $this;
				}
				break;
			case 'option':
				if ( ! $is_multidimensional ) {
					add_filter( "pre_option_{$id_base}", array( $this, '_preview_filter' ) );
				} else {
					if ( empty( self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['previewed_instances'] ) ) {
						// Only add these filters once for this ID base.
						add_filter( "option_{$id_base}", $multidimensional_filter );
						add_filter( "default_option_{$id_base}", $multidimensional_filter );
					}
					self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['previewed_instances'][ $this->id ] = $this;
				}
				break;
			default:
				/**
				 * Fires when the WP_Customize_Setting::preview() method is called for settings
				 * not handled as theme_mods or options.
				 *
				 * The dynamic portion of the hook name, `$this->id`, refers to the setting ID.
				 *
				 * @since 3.4.0
				 *
				 * @param WP_Customize_Setting $setting WP_Customize_Setting instance.
				 */
				do_action( "customize_preview_{$this->id}", $this );

				/**
				 * Fires when the WP_Customize_Setting::preview() method is called for settings
				 * not handled as theme_mods or options.
				 *
				 * The dynamic portion of the hook name, `$this->type`, refers to the setting type.
				 *
				 * @since 4.1.0
				 *
				 * @param WP_Customize_Setting $setting WP_Customize_Setting instance.
				 */
				do_action( "customize_preview_{$this->type}", $this );
		}

		$this->is_previewed = true;

		return true;
	}

	/**
	 * Clear out the previewed-applied flag for a multidimensional-aggregated value whenever its post value is updated.
	 *
	 * This ensures that the new value will get sanitized and used the next time
	 * that `WP_Customize_Setting::_multidimensional_preview_filter()`
	 * is called for this setting.
	 *
	 * @since 4.4.0
	 *
	 * @see WP_Customize_Manager::set_post_value()
	 * @see WP_Customize_Setting::_multidimensional_preview_filter()
	 */
	final public function _clear_aggregated_multidimensional_preview_applied_flag() {
		unset( self::$aggregated_multidimensionals[ $this->type ][ $this->id_data['base'] ]['preview_applied_instances'][ $this->id ] );
	}

	/**
	 * Callback function to filter non-multidimensional theme mods and options.
	 *
	 * If switch_to_blog() was called after the preview() method, and the current
	 * site is now not the same site, then this method does a no-op and returns
	 * the original value.
	 *
	 * @since 3.4.0
	 *
	 * @param mixed $original Old value.
	 * @return mixed New or old value.
	 */
	public function _preview_filter( $original ) {
		if ( ! $this->is_current_blog_previewed() ) {
			return $original;
		}

		$undefined  = new stdClass(); // Symbol hack.
		$post_value = $this->post_value( $undefined );
		if ( $undefined !== $post_value ) {
			$value = $post_value;
		} else {
			/*
			 * Note that we don't use $original here because preview() will
			 * not add the filter in the first place if it has an initial value
			 * and there is no post value.
			 */
			$value = $this->default;
		}
		return $value;
	}

	/**
	 * Callback function to filter multidimensional theme mods and options.
	 *
	 * For all multidimensional settings of a given type, the preview filter for
	 * the first setting previewed will be used to apply the values for the others.
	 *
	 * @since 4.4.0
	 *
	 * @see WP_Customize_Setting::$aggregated_multidimensionals
	 * @param mixed $original Original root value.
	 * @return mixed New or old value.
	 */
	final public function _multidimensional_preview_filter( $original ) {
		if ( ! $this->is_current_blog_previewed() ) {
			return $original;
		}

		$id_base = $this->id_data['base'];

		// If no settings have been previewed yet (which should not be the case, since $this is), just pass through the original value.
		if ( empty( self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['previewed_instances'] ) ) {
			return $original;
		}

		foreach ( self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['previewed_instances'] as $previewed_setting ) {
			// Skip applying previewed value for any settings that have already been applied.
			if ( ! empty( self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['preview_applied_instances'][ $previewed_setting->id ] ) ) {
				continue;
			}

			// Do the replacements of the posted/default sub value into the root value.
			$value = $previewed_setting->post_value( $previewed_setting->default );
			$root  = self::$aggregated_multidimensionals[ $previewed_setting->type ][ $id_base ]['root_value'];
			$root  = $previewed_setting->multidimensional_replace( $root, $previewed_setting->id_data['keys'], $value );
			self::$aggregated_multidimensionals[ $previewed_setting->type ][ $id_base ]['root_value'] = $root;

			// Mark this setting having been applied so that it will be skipped when the filter is called again.
			self::$aggregated_multidimensionals[ $previewed_setting->type ][ $id_base ]['preview_applied_instances'][ $previewed_setting->id ] = true;
		}

		return self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['root_value'];
	}

	/**
	 * Checks user capabilities and theme supports, and then saves
	 * the value of the setting.
	 *
	 * @since 3.4.0
	 *
	 * @return void|false Void on success, false if cap check fails
	 *                    or value isn't set or is invalid.
	 */
	final public function save() {
		$value = $this->post_value();

		if ( ! $this->check_capabilities() || ! isset( $value ) ) {
			return false;
		}

		$id_base = $this->id_data['base'];

		/**
		 * Fires when the WP_Customize_Setting::save() method is called.
		 *
		 * The dynamic portion of the hook name, `$id_base` refers to
		 * the base slug of the setting name.
		 *
		 * @since 3.4.0
		 *
		 * @param WP_Customize_Setting $setting WP_Customize_Setting instance.
		 */
		do_action( "customize_save_{$id_base}", $this );

		$this->update( $value );
	}

	/**
	 * Fetch and sanitize the $_POST value for the setting.
	 *
	 * During a save request prior to save, post_value() provides the new value while value() does not.
	 *
	 * @since 3.4.0
	 *
	 * @param mixed $default_value A default value which is used as a fallback. Default null.
	 * @return mixed The default value on failure, otherwise the sanitized and validated value.
	 */
	final public function post_value( $default_value = null ) {
		return $this->manager->post_value( $this, $default_value );
	}

	/**
	 * Sanitize an input.
	 *
	 * @since 3.4.0
	 *
	 * @param string|array $value The value to sanitize.
	 * @return string|array|null|WP_Error Sanitized value, or `null`/`WP_Error` if invalid.
	 */
	public function sanitize( $value ) {

		/**
		 * Filters a Customize setting value in un-slashed form.
		 *
		 * @since 3.4.0
		 *
		 * @param mixed                $value   Value of the setting.
		 * @param WP_Customize_Setting $setting WP_Customize_Setting instance.
		 */
		return apply_filters( "customize_sanitize_{$this->id}", $value, $this );
	}

	/**
	 * Validates an input.
	 *
	 * @since 4.6.0
	 *
	 * @see WP_REST_Request::has_valid_params()
	 *
	 * @param mixed $value Value to validate.
	 * @return true|WP_Error True if the input was validated, otherwise WP_Error.
	 */
	public function validate( $value ) {
		if ( is_wp_error( $value ) ) {
			return $value;
		}
		if ( is_null( $value ) ) {
			return new WP_Error( 'invalid_value', __( 'Invalid value.' ) );
		}

		$validity = new WP_Error();

		/**
		 * Validates a Customize setting value.
		 *
		 * Plugins should amend the `$validity` object via its `WP_Error::add()` method.
		 *
		 * The dynamic portion of the hook name, `$this->ID`, refers to the setting ID.
		 *
		 * @since 4.6.0
		 *
		 * @param WP_Error             $validity Filtered from `true` to `WP_Error` when invalid.
		 * @param mixed                $value    Value of the setting.
		 * @param WP_Customize_Setting $setting  WP_Customize_Setting instance.
		 */
		$validity = apply_filters( "customize_validate_{$this->id}", $validity, $value, $this );

		if ( is_wp_error( $validity ) && ! $validity->has_errors() ) {
			$validity = true;
		}
		return $validity;
	}

	/**
	 * Get the root value for a setting, especially for multidimensional ones.
	 *
	 * @since 4.4.0
	 *
	 * @param mixed $default_value Value to return if root does not exist.
	 * @return mixed
	 */
	protected function get_root_value( $default_value = null ) {
		$id_base = $this->id_data['base'];
		if ( 'option' === $this->type ) {
			return get_option( $id_base, $default_value );
		} elseif ( 'theme_mod' === $this->type ) {
			return get_theme_mod( $id_base, $default_value );
		} else {
			/*
			 * Any WP_Customize_Setting subclass implementing aggregate multidimensional
			 * will need to override this method to obtain the data from the appropriate
			 * location.
			 */
			return $default_value;
		}
	}

	/**
	 * Set the root value for a setting, especially for multidimensional ones.
	 *
	 * @since 4.4.0
	 *
	 * @param mixed $value Value to set as root of multidimensional setting.
	 * @return bool Whether the multidimensional root was updated successfully.
	 */
	protected function set_root_value( $value ) {
		$id_base = $this->id_data['base'];
		if ( 'option' === $this->type ) {
			$autoload = true;
			if ( isset( self::$aggregated_multidimensionals[ $this->type ][ $this->id_data['base'] ]['autoload'] ) ) {
				$autoload = self::$aggregated_multidimensionals[ $this->type ][ $this->id_data['base'] ]['autoload'];
			}
			return update_option( $id_base, $value, $autoload );
		} elseif ( 'theme_mod' === $this->type ) {
			set_theme_mod( $id_base, $value );
			return true;
		} else {
			/*
			 * Any WP_Customize_Setting subclass implementing aggregate multidimensional
			 * will need to override this method to obtain the data from the appropriate
			 * location.
			 */
			return false;
		}
	}

	/**
	 * Save the value of the setting, using the related API.
	 *
	 * @since 3.4.0
	 *
	 * @param mixed $value The value to update.
	 * @return bool The result of saving the value.
	 */
	protected function update( $value ) {
		$id_base = $this->id_data['base'];
		if ( 'option' === $this->type || 'theme_mod' === $this->type ) {
			if ( ! $this->is_multidimensional_aggregated ) {
				return $this->set_root_value( $value );
			} else {
				$root = self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['root_value'];
				$root = $this->multidimensional_replace( $root, $this->id_data['keys'], $value );
				self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['root_value'] = $root;
				return $this->set_root_value( $root );
			}
		} else {
			/**
			 * Fires when the WP_Customize_Setting::update() method is called for settings
			 * not handled as theme_mods or options.
			 *
			 * The dynamic portion of the hook name, `$this->type`, refers to the type of setting.
			 *
			 * @since 3.4.0
			 *
			 * @param mixed                $value   Value of the setting.
			 * @param WP_Customize_Setting $setting WP_Customize_Setting instance.
			 */
			do_action( "customize_update_{$this->type}", $value, $this );

			return has_action( "customize_update_{$this->type}" );
		}
	}

	/**
	 * Deprecated method.
	 *
	 * @since 3.4.0
	 * @deprecated 4.4.0 Deprecated in favor of update() method.
	 */
	protected function _update_theme_mod() {
		_deprecated_function( __METHOD__, '4.4.0', __CLASS__ . '::update()' );
	}

	/**
	 * Deprecated method.
	 *
	 * @since 3.4.0
	 * @deprecated 4.4.0 Deprecated in favor of update() method.
	 */
	protected function _update_option() {
		_deprecated_function( __METHOD__, '4.4.0', __CLASS__ . '::update()' );
	}

	/**
	 * Fetch the value of the setting.
	 *
	 * @since 3.4.0
	 *
	 * @return mixed The value.
	 */
	public function value() {
		$id_base      = $this->id_data['base'];
		$is_core_type = ( 'option' === $this->type || 'theme_mod' === $this->type );

		if ( ! $is_core_type && ! $this->is_multidimensional_aggregated ) {

			// Use post value if previewed and a post value is present.
			if ( $this->is_previewed ) {
				$value = $this->post_value( null );
				if ( null !== $value ) {
					return $value;
				}
			}

			$value = $this->get_root_value( $this->default );

			/**
			 * Filters a Customize setting value not handled as a theme_mod or option.
			 *
			 * The dynamic portion of the hook name, `$id_base`, refers to
			 * the base slug of the setting name, initialized from `$this->id_data['base']`.
			 *
			 * For settings handled as theme_mods or options, see those corresponding
			 * functions for available hooks.
			 *
			 * @since 3.4.0
			 * @since 4.6.0 Added the `$this` setting instance as the second parameter.
			 *
			 * @param mixed                $default_value The setting default value. Default empty.
			 * @param WP_Customize_Setting $setting       The setting instance.
			 */
			$value = apply_filters( "customize_value_{$id_base}", $value, $this );
		} elseif ( $this->is_multidimensional_aggregated ) {
			$root_value = self::$aggregated_multidimensionals[ $this->type ][ $id_base ]['root_value'];
			$value      = $this->multidimensional_get( $root_value, $this->id_data['keys'], $this->default );

			// Ensure that the post value is used if the setting is previewed, since preview filters aren't applying on cached $root_value.
			if ( $this->is_previewed ) {
				$value = $this->post_value( $value );
			}
		} else {
			$value = $this->get_root_value( $this->default );
		}
		return $value;
	}

	/**
	 * Sanitize the setting's value for use in JavaScript.
	 *
	 * @since 3.4.0
	 *
	 * @return mixed The requested escaped value.
	 */
	public function js_value() {

		/**
		 * Filters a Customize setting value for use in JavaScript.
		 *
		 * The dynamic portion of the hook name, `$this->id`, refers to the setting ID.
		 *
		 * @since 3.4.0
		 *
		 * @param mixed                $value   The setting value.
		 * @param WP_Customize_Setting $setting WP_Customize_Setting instance.
		 */
		$value = apply_filters( "customize_sanitize_js_{$this->id}", $this->value(), $this );

		if ( is_string( $value ) ) {
			return html_entity_decode( $value, ENT_QUOTES, 'UTF-8' );
		}

		return $value;
	}

	/**
	 * Retrieves the data to export to the client via JSON.
	 *
	 * @since 4.6.0
	 *
	 * @return array Array of parameters passed to JavaScript.
	 */
	public function json() {
		return array(
			'value'     => $this->js_value(),
			'transport' => $this->transport,
			'dirty'     => $this->dirty,
			'type'      => $this->type,
		);
	}

	/**
	 * Validate user capabilities whether the theme supports the setting.
	 *
	 * @since 3.4.0
	 *
	 * @return bool False if theme doesn't support the setting or user can't change setting, otherwise true.
	 */
	final public function check_capabilities() {
		if ( $this->capability && ! current_user_can( $this->capability ) ) {
			return false;
		}

		if ( $this->theme_supports && ! current_theme_supports( ...(array) $this->theme_supports ) ) {
			return false;
		}

		return true;
	}

	/**
	 * Multidimensional helper function.
	 *
	 * @since 3.4.0
	 *
	 * @param array $root
	 * @param array $keys
	 * @param bool  $create Default false.
	 * @return array|void Keys are 'root', 'node', and 'key'.
	 */
	final protected function multidimensional( &$root, $keys, $create = false ) {
		if ( $create && empty( $root ) ) {
			$root = array();
		}

		if ( ! isset( $root ) || empty( $keys ) ) {
			return;
		}

		$last = array_pop( $keys );
		$node = &$root;

		foreach ( $keys as $key ) {
			if ( $create && ! isset( $node[ $key ] ) ) {
				$node[ $key ] = array();
			}

			if ( ! is_array( $node ) || ! isset( $node[ $key ] ) ) {
				return;
			}

			$node = &$node[ $key ];
		}

		if ( $create ) {
			if ( ! is_array( $node ) ) {
				// Account for an array overriding a string or object value.
				$node = array();
			}
			if ( ! isset( $node[ $last ] ) ) {
				$node[ $last ] = array();
			}
		}

		if ( ! isset( $node[ $last ] ) ) {
			return;
		}

		return array(
			'root' => &$root,
			'node' => &$node,
			'key'  => $last,
		);
	}

	/**
	 * Will attempt to replace a specific value in a multidimensional array.
	 *
	 * @since 3.4.0
	 *
	 * @param array $root
	 * @param array $keys
	 * @param mixed $value The value to update.
	 * @return mixed
	 */
	final protected function multidimensional_replace( $root, $keys, $value ) {
		if ( ! isset( $value ) ) {
			return $root;
		} elseif ( empty( $keys ) ) { // If there are no keys, we're replacing the root.
			return $value;
		}

		$result = $this->multidimensional( $root, $keys, true );

		if ( isset( $result ) ) {
			$result['node'][ $result['key'] ] = $value;
		}

		return $root;
	}

	/**
	 * Will attempt to fetch a specific value from a multidimensional array.
	 *
	 * @since 3.4.0
	 *
	 * @param array $root
	 * @param array $keys
	 * @param mixed $default_value A default value which is used as a fallback. Default null.
	 * @return mixed The requested value or the default value.
	 */
	final protected function multidimensional_get( $root, $keys, $default_value = null ) {
		if ( empty( $keys ) ) { // If there are no keys, test the root.
			return isset( $root ) ? $root : $default_value;
		}

		$result = $this->multidimensional( $root, $keys );
		return isset( $result ) ? $result['node'][ $result['key'] ] : $default_value;
	}

	/**
	 * Will attempt to check if a specific value in a multidimensional array is set.
	 *
	 * @since 3.4.0
	 *
	 * @param array $root
	 * @param array $keys
	 * @return bool True if value is set, false if not.
	 */
	final protected function multidimensional_isset( $root, $keys ) {
		$result = $this->multidimensional_get( $root, $keys );
		return isset( $result );
	}
}

/**
 * WP_Customize_Filter_Setting class.
 */
require_once ABSPATH . WPINC . '/customize/class-wp-customize-filter-setting.php';

/**
 * WP_Customize_Header_Image_Setting class.
 */
require_once ABSPATH . WPINC . '/customize/class-wp-customize-header-image-setting.php';

/**
 * WP_Customize_Background_Image_Setting class.
 */
require_once ABSPATH . WPINC . '/customize/class-wp-customize-background-image-setting.php';

/**
 * WP_Customize_Nav_Menu_Item_Setting class.
 */
require_once ABSPATH . WPINC . '/customize/class-wp-customize-nav-menu-item-setting.php';

/**
 * WP_Customize_Nav_Menu_Setting class.
 */
require_once ABSPATH . WPINC . '/customize/class-wp-customize-nav-menu-setting.php';