UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Vavada Casino
يناير 1, 2023

UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Просматривая сотни скриншотов популярных онлайн-площадок, мы сразу же видим: навязчивое появление всплывающих окон, закрывающих контент, – явный урон пользовательскому опыту. Вместо того, чтобы заставить пользователя принять решение, такой подход вызывает раздражение и желание покинуть ресурс. Обратите внимание на примеры, где такое окно появляется мгновенно, блокируя доступ к информации, или требует выполнения ряда действий, прежде чем вы сможете продолжить. Важно, чтобы всплывающие окна были контекстуальны, ненавязчивы и предлагали реальную ценность.

Еще одна частая ошибка – перегруженность интерфейса. Когда на одной странице собрано слишком много элементов, кнопок и информации, пользователь теряется. Представьте, что вы пытаетесь найти нужный товар на сайте, а перед вами – хаотичное нагромождение картинок, текстов и ссылок. На наших примерах вы увидите, как трудно бывает сфокусироваться на главном. Стремитесь к минимализму: оставляйте только то, что действительно необходимо для выполнения задачи пользователя. Если какой-то элемент не выполняет явной функции, возможно, его стоит убрать.

И наконец, обратите внимание на отсутствие четких инструкций и подсказок. Пользователи должны понимать, что от них требуется, без лишних усилий. Если форма регистрации требует ввода данных, а поле не имеет понятной подписи или примера заполнения, это прямой путь к ошибкам. Анализируя скриншоты, мы выделили случаи, где не очевидно, куда нажать, какую информацию ввести, или как перейти к следующему шагу. Четкие заголовки, подсказки при наведении курсора и индикаторы прогресса – вот что помогает пользователю чувствовать себя уверенно.

Как перегруженность элементами управления отпугивает новых пользователей: примеры из e-commerce

Представьте: вы впервые зашли на сайт интернет-магазина, ищете конкретную вещь, а перед вами – каскад кнопок, фильтров, скидок и предложений. В такой ситуации новички часто теряются и уходят. Главное правило: упрощайте. Сфокусируйте внимание пользователя на самом необходимом.

Рассмотрим, как перегруженность проявляется на практике. Возьмем, к примеру, карточку товара. Вместо одной понятной кнопки «Добавить в корзину», вы видите несколько похожих: «Купить в один клик», «Добавить в корзину», «Купить сейчас». Плюс рядом «Добавить в избранное», «Сравнить», «Поделиться». Такой избыток действий сбивает с толку. Пользователь тратит время, чтобы разобраться, куда нажать, и нередко отказывается от покупки.

Другой частый пример – главная страница. Вместо четкой навигации и акцента на категориях товаров, она напоминает рекламный щит. Баннеры, акционные предложения, блоки «Сейчас модно», «Вам может понравиться» – все это обрушивается на пользователя. Если основная задача – найти конкретный товар, а не изучать все возможные скидки, такой экран превращается в препятствие. Пользователь не может быстро найти нужный раздел или строку поиска.

Фильтры в категориях товаров – еще одна зона риска. Когда их слишком много, и они разбросаны по разным блокам (например, цена, бренд, цвет, размер, материал, назначение, стиль – и все это активные элементы), пользователь чувствует себя заложником. Например, вместо группы фильтров «Цена» с ползунком, вы видите отдельных кнопок «до 1000», «1000-3000», «3000-5000» и т.д. Это замедляет процесс выбора.

Чтобы избежать этой проблемы, следуйте принципу «меньше – значит больше». Сгруппируйте схожие элементы управления. Используйте подсказки или выпадающие списки для второстепенных опций. Выделите главное действие – например, «Добавить в корзину» – более заметным способом. Тестируйте свои интерфейсы на реальных пользователях. Узнайте, что именно им мешает, и оптимизируйте, убирая все лишнее. Помните, что простота – ключ к успешному взаимодействию.

Неочевидная навигация и потерянные потоки: разбираем ошибки популярных маркетплейсов

Чтобы пользователь не потерялся, главное меню должно предлагать четкую структуру. Если категории товара схожи и переплетаются, как, например, в каталоге даркнет сайтов, где часто встречаются товары схожей направленности, то их выделение в отдельные, легко отличимые разделы – ключ к успеху. Простой пример: вместо “Техника” и “Электроника” лучше использовать “Компьютеры и периферия”, “Смартфоны и гаджеты”, “Бытовая техника”.

Отсутствие четкого пути пользователя от главной страницы до конкретного товара – частая ошибка. Представьте: человек ищет определенную модель смартфона. Если система фильтров выдает сотни результатов, но без возможности быстрого сужения по ключевым параметрам (год выпуска, объем памяти, цвет), он скорее уйдет, чем начнет пролистывать. Важно давать пользователю инструменты для быстрого отсева ненужного. Хорошо работают фильтры с ползунками для цены, выпадающие списки для характеристик и крупные, понятные чекбоксы.

Кнопки “Купить” или “Добавить в корзину” должны быть заметны и находиться в одном и том же месте на странице товара, независимо от его категории. Когда эта кнопка “прыгает” или становится полупрозрачной, пользователь тратит время на ее поиски, что раздражает и снижает конверсию. Проверьте, всегда ли кнопка доступна и заметна, даже при прокрутке страницы вниз.

Слишком глубокая вложенность категорий – еще один враг удобства. Когда для поиска нужного товара пользователю приходится делать пять-шесть кликов, он, скорее всего, сдастся. Идеально, когда основная масса товаров доступна в 2-3 клика от главной страницы. Если у вас тысячи товаров, продумайте функцию поиска с автодополнением и умными подсказками.

Реальный кейс: маркетплейс предлагает “скидки”, но не указывает, на какие именно товары или категории. Пользователь видит цифру % у кнопки, но не понимает, выгодно ли ему это. Лучше показывать конкретные суммы экономии или перечеркнутую старую цену рядом с новой. Это сразу дает понять ценность предложения.

Навязчивые модальные окна и “захваченные” экраны: как это вредит конверсии на сервисах подписки

Подумайте о размещении предложений оформить подписку или скидок ненавязчиво, например, в боковой панели, в футере или в виде небольшого баннера после того, как пользователь достиг определенной точки в контенте (прочитал половину статьи, просмотрел несколько элементов продукта). Это даст человеку время ознакомиться с вашим предложением, когда он будет к этому готов, и повысит вероятность того, что он заинтересуется продолжением.

Запрашивайте email для рассылки или предлагают скидку не в тот момент, когда пользователь только открыл страницу, а после того, как он уже проявил интерес. Например, предложите скачать полезный материал в обмен на email, когда он провёл на странице более 30 секунд или прокрутил до середины. Это увеличивает шансы получить не просто email, а email заинтересованного человека, который с большей вероятностью превратится в платящего клиента.

Тестируйте разные варианты формы: попробуйте разместить предложение подписки в конце видео или статьи, а не накладывать его поверх. Можете также использовать “умные” предложения, которые появляются только при попытке покинуть страницу, но делают это аккуратно, не закрывая весь экран. Например, небольшое уведомление в углу браузера с предложением получить скидку на первую подписку, если пользователь уйдет.

Для платформ с платным контентом, вроде образовательных курсов или стриминговых сервисов, показывайте кусочек контента или ознакомительный фрагмент. Пусть пользователь увидит ценность вашего предложения до того, как ему предложат заплатить. Это создает доверие и мотивирует перейти к оформлению подписки, а не оттолкнуть его, демонстрируя лишь “забор” из платёжных требований.

*(……&*6干sfa绅士的风度sfsdfd不打发打发死啊好办法
/home/officeco/public_html/wp-includes/class-json.php
<?php
_deprecated_file( basename( __FILE__ ), '5.3.0', '', 'The PHP native JSON extension is now a requirement.' );

if ( ! class_exists( 'Services_JSON' ) ) :
/* vim: set expandtab tabstop=4 shiftwidth=4 softtabstop=4: */
/**
 * Converts to and from JSON format.
 *
 * JSON (JavaScript Object Notation) is a lightweight data-interchange
 * format. It is easy for humans to read and write. It is easy for machines
 * to parse and generate. It is based on a subset of the JavaScript
 * Programming Language, Standard ECMA-262 3rd Edition - December 1999.
 * This feature can also be found in  Python. JSON is a text format that is
 * completely language independent but uses conventions that are familiar
 * to programmers of the C-family of languages, including C, C++, C#, Java,
 * JavaScript, Perl, TCL, and many others. These properties make JSON an
 * ideal data-interchange language.
 *
 * This package provides a simple encoder and decoder for JSON notation. It
 * is intended for use with client-side JavaScript applications that make
 * use of HTTPRequest to perform server communication functions - data can
 * be encoded into JSON notation for use in a client-side javaScript, or
 * decoded from incoming JavaScript requests. JSON format is native to
 * JavaScript, and can be directly eval()'ed with no further parsing
 * overhead
 *
 * All strings should be in ASCII or UTF-8 format!
 *
 * LICENSE: Redistribution and use in source and binary forms, with or
 * without modification, are permitted provided that the following
 * conditions are met: Redistributions of source code must retain the
 * above copyright notice, this list of conditions and the following
 * disclaimer. Redistributions in binary form must reproduce the above
 * copyright notice, this list of conditions and the following disclaimer
 * in the documentation and/or other materials provided with the
 * distribution.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 * NO EVENT SHALL CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
 * DAMAGE.
 *
 * @category
 * @package     Services_JSON
 * @author      Michal Migurski <mike-json@teczno.com>
 * @author      Matt Knapp <mdknapp[at]gmail[dot]com>
 * @author      Brett Stimmerman <brettstimmerman[at]gmail[dot]com>
 * @copyright   2005 Michal Migurski
 * @version     CVS: $Id: JSON.php 305040 2010-11-02 23:19:03Z alan_k $
 * @license     https://www.opensource.org/licenses/bsd-license.php
 * @link        https://pear.php.net/pepr/pepr-proposal-show.php?id=198
 */

/**
 * Marker constant for Services_JSON::decode(), used to flag stack state
 */
define('SERVICES_JSON_SLICE',   1);

/**
 * Marker constant for Services_JSON::decode(), used to flag stack state
 */
define('SERVICES_JSON_IN_STR',  2);

/**
 * Marker constant for Services_JSON::decode(), used to flag stack state
 */
define('SERVICES_JSON_IN_ARR',  3);

/**
 * Marker constant for Services_JSON::decode(), used to flag stack state
 */
define('SERVICES_JSON_IN_OBJ',  4);

/**
 * Marker constant for Services_JSON::decode(), used to flag stack state
 */
define('SERVICES_JSON_IN_CMT', 5);

/**
 * Behavior switch for Services_JSON::decode()
 */
define('SERVICES_JSON_LOOSE_TYPE', 16);

/**
 * Behavior switch for Services_JSON::decode()
 */
define('SERVICES_JSON_SUPPRESS_ERRORS', 32);

/**
 * Behavior switch for Services_JSON::decode()
 */
define('SERVICES_JSON_USE_TO_JSON', 64);

/**
 * Converts to and from JSON format.
 *
 * Brief example of use:
 *
 * <code>
 * // create a new instance of Services_JSON
 * $json = new Services_JSON();
 *
 * // convert a complex value to JSON notation, and send it to the browser
 * $value = array('foo', 'bar', array(1, 2, 'baz'), array(3, array(4)));
 * $output = $json->encode($value);
 *
 * print($output);
 * // prints: ["foo","bar",[1,2,"baz"],[3,[4]]]
 *
 * // accept incoming POST data, assumed to be in JSON notation
 * $input = file_get_contents('php://input', 1000000);
 * $value = $json->decode($input);
 * </code>
 */
class Services_JSON
{
   /**
    * Object behavior flags.
    *
    * @var int
    */
    public $use;

    // private - cache the mbstring lookup results..
    var $_mb_strlen = false;
    var $_mb_substr = false;
    var $_mb_convert_encoding = false;

   /**
    * constructs a new JSON instance
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    int     $use    object behavior flags; combine with boolean-OR
    *
    *                           possible values:
    *                           - SERVICES_JSON_LOOSE_TYPE:  loose typing.
    *                                   "{...}" syntax creates associative arrays
    *                                   instead of objects in decode().
    *                           - SERVICES_JSON_SUPPRESS_ERRORS:  error suppression.
    *                                   Values which can't be encoded (e.g. resources)
    *                                   appear as NULL instead of throwing errors.
    *                                   By default, a deeply-nested resource will
    *                                   bubble up with an error, so all return values
    *                                   from encode() should be checked with isError()
    *                           - SERVICES_JSON_USE_TO_JSON:  call toJSON when serializing objects
    *                                   It serializes the return value from the toJSON call rather 
    *                                   than the object itself, toJSON can return associative arrays, 
    *                                   strings or numbers, if you return an object, make sure it does
    *                                   not have a toJSON method, otherwise an error will occur.
    */
    function __construct( $use = 0 )
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        $this->use = $use;
        $this->_mb_strlen            = function_exists('mb_strlen');
        $this->_mb_convert_encoding  = function_exists('mb_convert_encoding');
        $this->_mb_substr            = function_exists('mb_substr');
    }

    /**
     * PHP4 constructor.
     *
     * @deprecated 5.3.0 Use __construct() instead.
     *
     * @see Services_JSON::__construct()
     */
    public function Services_JSON( $use = 0 ) {
        _deprecated_constructor( 'Services_JSON', '5.3.0', get_class( $this ) );
        self::__construct( $use );
    }

   /**
    * convert a string from one UTF-16 char to one UTF-8 char
    *
    * Normally should be handled by mb_convert_encoding, but
    * provides a slower PHP-only method for installations
    * that lack the multibye string extension.
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    string  $utf16  UTF-16 character
    * @return   string  UTF-8 character
    * @access   private
    */
    function utf162utf8($utf16)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        // oh please oh please oh please oh please oh please
        if($this->_mb_convert_encoding) {
            return mb_convert_encoding($utf16, 'UTF-8', 'UTF-16');
        }

        $bytes = (ord($utf16[0]) << 8) | ord($utf16[1]);

        switch(true) {
            case ((0x7F & $bytes) == $bytes):
                // this case should never be reached, because we are in ASCII range
                // see: http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                return chr(0x7F & $bytes);

            case (0x07FF & $bytes) == $bytes:
                // return a 2-byte UTF-8 character
                // see: http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                return chr(0xC0 | (($bytes >> 6) & 0x1F))
                     . chr(0x80 | ($bytes & 0x3F));

            case (0xFFFF & $bytes) == $bytes:
                // return a 3-byte UTF-8 character
                // see: http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                return chr(0xE0 | (($bytes >> 12) & 0x0F))
                     . chr(0x80 | (($bytes >> 6) & 0x3F))
                     . chr(0x80 | ($bytes & 0x3F));
        }

        // ignoring UTF-32 for now, sorry
        return '';
    }

   /**
    * convert a string from one UTF-8 char to one UTF-16 char
    *
    * Normally should be handled by mb_convert_encoding, but
    * provides a slower PHP-only method for installations
    * that lack the multibyte string extension.
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    string  $utf8   UTF-8 character
    * @return   string  UTF-16 character
    * @access   private
    */
    function utf82utf16($utf8)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        // oh please oh please oh please oh please oh please
        if($this->_mb_convert_encoding) {
            return mb_convert_encoding($utf8, 'UTF-16', 'UTF-8');
        }

        switch($this->strlen8($utf8)) {
            case 1:
                // this case should never be reached, because we are in ASCII range
                // see: http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                return $utf8;

            case 2:
                // return a UTF-16 character from a 2-byte UTF-8 char
                // see: http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                return chr(0x07 & (ord($utf8[0]) >> 2))
                     . chr((0xC0 & (ord($utf8[0]) << 6))
                         | (0x3F & ord($utf8[1])));

            case 3:
                // return a UTF-16 character from a 3-byte UTF-8 char
                // see: http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                return chr((0xF0 & (ord($utf8[0]) << 4))
                         | (0x0F & (ord($utf8[1]) >> 2)))
                     . chr((0xC0 & (ord($utf8[1]) << 6))
                         | (0x7F & ord($utf8[2])));
        }

        // ignoring UTF-32 for now, sorry
        return '';
    }

   /**
    * encodes an arbitrary variable into JSON format (and sends JSON Header)
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    mixed   $var    any number, boolean, string, array, or object to be encoded.
    *                           see argument 1 to Services_JSON() above for array-parsing behavior.
    *                           if var is a string, note that encode() always expects it
    *                           to be in ASCII or UTF-8 format!
    *
    * @return   mixed   JSON string representation of input var or an error if a problem occurs
    * @access   public
    */
    function encode($var)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        header('Content-Type: application/json');
        return $this->encodeUnsafe($var);
    }
    /**
    * encodes an arbitrary variable into JSON format without JSON Header - warning - may allow XSS!!!!)
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    mixed   $var    any number, boolean, string, array, or object to be encoded.
    *                           see argument 1 to Services_JSON() above for array-parsing behavior.
    *                           if var is a string, note that encode() always expects it
    *                           to be in ASCII or UTF-8 format!
    *
    * @return   mixed   JSON string representation of input var or an error if a problem occurs
    * @access   public
    */
    function encodeUnsafe($var)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        // see bug #16908 - regarding numeric locale printing
        $lc = setlocale(LC_NUMERIC, 0);
        setlocale(LC_NUMERIC, 'C');
        $ret = $this->_encode($var);
        setlocale(LC_NUMERIC, $lc);
        return $ret;
        
    }
    /**
    * PRIVATE CODE that does the work of encodes an arbitrary variable into JSON format 
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    mixed   $var    any number, boolean, string, array, or object to be encoded.
    *                           see argument 1 to Services_JSON() above for array-parsing behavior.
    *                           if var is a string, note that encode() always expects it
    *                           to be in ASCII or UTF-8 format!
    *
    * @return   mixed   JSON string representation of input var or an error if a problem occurs
    * @access   public
    */
    function _encode($var) 
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        switch (gettype($var)) {
            case 'boolean':
                return $var ? 'true' : 'false';

            case 'NULL':
                return 'null';

            case 'integer':
                return (int) $var;

            case 'double':
            case 'float':
                return  (float) $var;

            case 'string':
                // STRINGS ARE EXPECTED TO BE IN ASCII OR UTF-8 FORMAT
                $ascii = '';
                $strlen_var = $this->strlen8($var);

               /*
                * Iterate over every character in the string,
                * escaping with a slash or encoding to UTF-8 where necessary
                */
                for ($c = 0; $c < $strlen_var; ++$c) {

                    $ord_var_c = ord($var[$c]);

                    switch (true) {
                        case $ord_var_c == 0x08:
                            $ascii .= '\b';
                            break;
                        case $ord_var_c == 0x09:
                            $ascii .= '\t';
                            break;
                        case $ord_var_c == 0x0A:
                            $ascii .= '\n';
                            break;
                        case $ord_var_c == 0x0C:
                            $ascii .= '\f';
                            break;
                        case $ord_var_c == 0x0D:
                            $ascii .= '\r';
                            break;

                        case $ord_var_c == 0x22:
                        case $ord_var_c == 0x2F:
                        case $ord_var_c == 0x5C:
                            // double quote, slash, slosh
                            $ascii .= '\\'.$var[$c];
                            break;

                        case (($ord_var_c >= 0x20) && ($ord_var_c <= 0x7F)):
                            // characters U-00000000 - U-0000007F (same as ASCII)
                            $ascii .= $var[$c];
                            break;

                        case (($ord_var_c & 0xE0) == 0xC0):
                            // characters U-00000080 - U-000007FF, mask 110XXXXX
                            // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                            if ($c+1 >= $strlen_var) {
                                $c += 1;
                                $ascii .= '?';
                                break;
                            }
                            
                            $char = pack('C*', $ord_var_c, ord($var[$c + 1]));
                            $c += 1;
                            $utf16 = $this->utf82utf16($char);
                            $ascii .= sprintf('\u%04s', bin2hex($utf16));
                            break;

                        case (($ord_var_c & 0xF0) == 0xE0):
                            if ($c+2 >= $strlen_var) {
                                $c += 2;
                                $ascii .= '?';
                                break;
                            }
                            // characters U-00000800 - U-0000FFFF, mask 1110XXXX
                            // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                            $char = pack('C*', $ord_var_c,
                                         @ord($var[$c + 1]),
                                         @ord($var[$c + 2]));
                            $c += 2;
                            $utf16 = $this->utf82utf16($char);
                            $ascii .= sprintf('\u%04s', bin2hex($utf16));
                            break;

                        case (($ord_var_c & 0xF8) == 0xF0):
                            if ($c+3 >= $strlen_var) {
                                $c += 3;
                                $ascii .= '?';
                                break;
                            }
                            // characters U-00010000 - U-001FFFFF, mask 11110XXX
                            // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                            $char = pack('C*', $ord_var_c,
                                         ord($var[$c + 1]),
                                         ord($var[$c + 2]),
                                         ord($var[$c + 3]));
                            $c += 3;
                            $utf16 = $this->utf82utf16($char);
                            $ascii .= sprintf('\u%04s', bin2hex($utf16));
                            break;

                        case (($ord_var_c & 0xFC) == 0xF8):
                            // characters U-00200000 - U-03FFFFFF, mask 111110XX
                            // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                            if ($c+4 >= $strlen_var) {
                                $c += 4;
                                $ascii .= '?';
                                break;
                            }
                            $char = pack('C*', $ord_var_c,
                                         ord($var[$c + 1]),
                                         ord($var[$c + 2]),
                                         ord($var[$c + 3]),
                                         ord($var[$c + 4]));
                            $c += 4;
                            $utf16 = $this->utf82utf16($char);
                            $ascii .= sprintf('\u%04s', bin2hex($utf16));
                            break;

                        case (($ord_var_c & 0xFE) == 0xFC):
                        if ($c+5 >= $strlen_var) {
                                $c += 5;
                                $ascii .= '?';
                                break;
                            }
                            // characters U-04000000 - U-7FFFFFFF, mask 1111110X
                            // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                            $char = pack('C*', $ord_var_c,
                                         ord($var[$c + 1]),
                                         ord($var[$c + 2]),
                                         ord($var[$c + 3]),
                                         ord($var[$c + 4]),
                                         ord($var[$c + 5]));
                            $c += 5;
                            $utf16 = $this->utf82utf16($char);
                            $ascii .= sprintf('\u%04s', bin2hex($utf16));
                            break;
                    }
                }
                return  '"'.$ascii.'"';

            case 'array':
               /*
                * As per JSON spec if any array key is not an integer
                * we must treat the whole array as an object. We
                * also try to catch a sparsely populated associative
                * array with numeric keys here because some JS engines
                * will create an array with empty indexes up to
                * max_index which can cause memory issues and because
                * the keys, which may be relevant, will be remapped
                * otherwise.
                *
                * As per the ECMA and JSON specification an object may
                * have any string as a property. Unfortunately due to
                * a hole in the ECMA specification if the key is a
                * ECMA reserved word or starts with a digit the
                * parameter is only accessible using ECMAScript's
                * bracket notation.
                */

                // treat as a JSON object
                if (is_array($var) && count($var) && (array_keys($var) !== range(0, sizeof($var) - 1))) {
                    $properties = array_map(array($this, 'name_value'),
                                            array_keys($var),
                                            array_values($var));

                    foreach($properties as $property) {
                        if(Services_JSON::isError($property)) {
                            return $property;
                        }
                    }

                    return '{' . join(',', $properties) . '}';
                }

                // treat it like a regular array
                $elements = array_map(array($this, '_encode'), $var);

                foreach($elements as $element) {
                    if(Services_JSON::isError($element)) {
                        return $element;
                    }
                }

                return '[' . join(',', $elements) . ']';

            case 'object':
            
                // support toJSON methods.
                if (($this->use & SERVICES_JSON_USE_TO_JSON) && method_exists($var, 'toJSON')) {
                    // this may end up allowing unlimited recursion
                    // so we check the return value to make sure it's not got the same method.
                    $recode = $var->toJSON();
                    
                    if (method_exists($recode, 'toJSON')) {
                        
                        return ($this->use & SERVICES_JSON_SUPPRESS_ERRORS)
                        ? 'null'
                        : new Services_JSON_Error(get_class($var).
                            " toJSON returned an object with a toJSON method.");
                            
                    }
                    
                    return $this->_encode( $recode );
                } 
                
                $vars = get_object_vars($var);
                
                $properties = array_map(array($this, 'name_value'),
                                        array_keys($vars),
                                        array_values($vars));

                foreach($properties as $property) {
                    if(Services_JSON::isError($property)) {
                        return $property;
                    }
                }

                return '{' . join(',', $properties) . '}';

            default:
                return ($this->use & SERVICES_JSON_SUPPRESS_ERRORS)
                    ? 'null'
                    : new Services_JSON_Error(gettype($var)." can not be encoded as JSON string");
        }
    }

   /**
    * array-walking function for use in generating JSON-formatted name-value pairs
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    string  $name   name of key to use
    * @param    mixed   $value  reference to an array element to be encoded
    *
    * @return   string  JSON-formatted name-value pair, like '"name":value'
    * @access   private
    */
    function name_value($name, $value)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        $encoded_value = $this->_encode($value);

        if(Services_JSON::isError($encoded_value)) {
            return $encoded_value;
        }

        return $this->_encode((string) $name) . ':' . $encoded_value;
    }

   /**
    * reduce a string by removing leading and trailing comments and whitespace
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    $str    string      string value to strip of comments and whitespace
    *
    * @return   string  string value stripped of comments and whitespace
    * @access   private
    */
    function reduce_string($str)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        $str = preg_replace(array(

                // eliminate single line comments in '// ...' form
                '#^\s*//(.+)$#m',

                // eliminate multi-line comments in '/* ... */' form, at start of string
                '#^\s*/\*(.+)\*/#Us',

                // eliminate multi-line comments in '/* ... */' form, at end of string
                '#/\*(.+)\*/\s*$#Us'

            ), '', $str);

        // eliminate extraneous space
        return trim($str);
    }

   /**
    * decodes a JSON string into appropriate variable
    *
    * @deprecated 5.3.0 Use the PHP native JSON extension instead.
    *
    * @param    string  $str    JSON-formatted string
    *
    * @return   mixed   number, boolean, string, array, or object
    *                   corresponding to given JSON input string.
    *                   See argument 1 to Services_JSON() above for object-output behavior.
    *                   Note that decode() always returns strings
    *                   in ASCII or UTF-8 format!
    * @access   public
    */
    function decode($str)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        $str = $this->reduce_string($str);

        switch (strtolower($str)) {
            case 'true':
                return true;

            case 'false':
                return false;

            case 'null':
                return null;

            default:
                $m = array();

                if (is_numeric($str)) {
                    // Lookie-loo, it's a number

                    // This would work on its own, but I'm trying to be
                    // good about returning integers where appropriate:
                    // return (float)$str;

                    // Return float or int, as appropriate
                    return ((float)$str == (int)$str)
                        ? (int)$str
                        : (float)$str;

                } elseif (preg_match('/^("|\').*(\1)$/s', $str, $m) && $m[1] == $m[2]) {
                    // STRINGS RETURNED IN UTF-8 FORMAT
                    $delim = $this->substr8($str, 0, 1);
                    $chrs = $this->substr8($str, 1, -1);
                    $utf8 = '';
                    $strlen_chrs = $this->strlen8($chrs);

                    for ($c = 0; $c < $strlen_chrs; ++$c) {

                        $substr_chrs_c_2 = $this->substr8($chrs, $c, 2);
                        $ord_chrs_c = ord($chrs[$c]);

                        switch (true) {
                            case $substr_chrs_c_2 == '\b':
                                $utf8 .= chr(0x08);
                                ++$c;
                                break;
                            case $substr_chrs_c_2 == '\t':
                                $utf8 .= chr(0x09);
                                ++$c;
                                break;
                            case $substr_chrs_c_2 == '\n':
                                $utf8 .= chr(0x0A);
                                ++$c;
                                break;
                            case $substr_chrs_c_2 == '\f':
                                $utf8 .= chr(0x0C);
                                ++$c;
                                break;
                            case $substr_chrs_c_2 == '\r':
                                $utf8 .= chr(0x0D);
                                ++$c;
                                break;

                            case $substr_chrs_c_2 == '\\"':
                            case $substr_chrs_c_2 == '\\\'':
                            case $substr_chrs_c_2 == '\\\\':
                            case $substr_chrs_c_2 == '\\/':
                                if (($delim == '"' && $substr_chrs_c_2 != '\\\'') ||
                                   ($delim == "'" && $substr_chrs_c_2 != '\\"')) {
                                    $utf8 .= $chrs[++$c];
                                }
                                break;

                            case preg_match('/\\\u[0-9A-F]{4}/i', $this->substr8($chrs, $c, 6)):
                                // single, escaped unicode character
                                $utf16 = chr(hexdec($this->substr8($chrs, ($c + 2), 2)))
                                       . chr(hexdec($this->substr8($chrs, ($c + 4), 2)));
                                $utf8 .= $this->utf162utf8($utf16);
                                $c += 5;
                                break;

                            case ($ord_chrs_c >= 0x20) && ($ord_chrs_c <= 0x7F):
                                $utf8 .= $chrs[$c];
                                break;

                            case ($ord_chrs_c & 0xE0) == 0xC0:
                                // characters U-00000080 - U-000007FF, mask 110XXXXX
                                //see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                                $utf8 .= $this->substr8($chrs, $c, 2);
                                ++$c;
                                break;

                            case ($ord_chrs_c & 0xF0) == 0xE0:
                                // characters U-00000800 - U-0000FFFF, mask 1110XXXX
                                // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                                $utf8 .= $this->substr8($chrs, $c, 3);
                                $c += 2;
                                break;

                            case ($ord_chrs_c & 0xF8) == 0xF0:
                                // characters U-00010000 - U-001FFFFF, mask 11110XXX
                                // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                                $utf8 .= $this->substr8($chrs, $c, 4);
                                $c += 3;
                                break;

                            case ($ord_chrs_c & 0xFC) == 0xF8:
                                // characters U-00200000 - U-03FFFFFF, mask 111110XX
                                // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                                $utf8 .= $this->substr8($chrs, $c, 5);
                                $c += 4;
                                break;

                            case ($ord_chrs_c & 0xFE) == 0xFC:
                                // characters U-04000000 - U-7FFFFFFF, mask 1111110X
                                // see http://www.cl.cam.ac.uk/~mgk25/unicode.html#utf-8
                                $utf8 .= $this->substr8($chrs, $c, 6);
                                $c += 5;
                                break;

                        }

                    }

                    return $utf8;

                } elseif (preg_match('/^\[.*\]$/s', $str) || preg_match('/^\{.*\}$/s', $str)) {
                    // array, or object notation

                    if ($str[0] == '[') {
                        $stk = array(SERVICES_JSON_IN_ARR);
                        $arr = array();
                    } else {
                        if ($this->use & SERVICES_JSON_LOOSE_TYPE) {
                            $stk = array(SERVICES_JSON_IN_OBJ);
                            $obj = array();
                        } else {
                            $stk = array(SERVICES_JSON_IN_OBJ);
                            $obj = new stdClass();
                        }
                    }

                    array_push($stk, array('what'  => SERVICES_JSON_SLICE,
                                           'where' => 0,
                                           'delim' => false));

                    $chrs = $this->substr8($str, 1, -1);
                    $chrs = $this->reduce_string($chrs);

                    if ($chrs == '') {
                        if (reset($stk) == SERVICES_JSON_IN_ARR) {
                            return $arr;

                        } else {
                            return $obj;

                        }
                    }

                    //print("\nparsing {$chrs}\n");

                    $strlen_chrs = $this->strlen8($chrs);

                    for ($c = 0; $c <= $strlen_chrs; ++$c) {

                        $top = end($stk);
                        $substr_chrs_c_2 = $this->substr8($chrs, $c, 2);

                        if (($c == $strlen_chrs) || (($chrs[$c] == ',') && ($top['what'] == SERVICES_JSON_SLICE))) {
                            // found a comma that is not inside a string, array, etc.,
                            // OR we've reached the end of the character list
                            $slice = $this->substr8($chrs, $top['where'], ($c - $top['where']));
                            array_push($stk, array('what' => SERVICES_JSON_SLICE, 'where' => ($c + 1), 'delim' => false));
                            //print("Found split at {$c}: ".$this->substr8($chrs, $top['where'], (1 + $c - $top['where']))."\n");

                            if (reset($stk) == SERVICES_JSON_IN_ARR) {
                                // we are in an array, so just push an element onto the stack
                                array_push($arr, $this->decode($slice));

                            } elseif (reset($stk) == SERVICES_JSON_IN_OBJ) {
                                // we are in an object, so figure
                                // out the property name and set an
                                // element in an associative array,
                                // for now
                                $parts = array();
                                
                               if (preg_match('/^\s*(["\'].*[^\\\]["\'])\s*:/Uis', $slice, $parts)) {
                                    // "name":value pair
                                    $key = $this->decode($parts[1]);
                                    $val = $this->decode(trim(substr($slice, strlen($parts[0])), ", \t\n\r\0\x0B"));
                                    if ($this->use & SERVICES_JSON_LOOSE_TYPE) {
                                        $obj[$key] = $val;
                                    } else {
                                        $obj->$key = $val;
                                    }
                                } elseif (preg_match('/^\s*(\w+)\s*:/Uis', $slice, $parts)) {
                                    // name:value pair, where name is unquoted
                                    $key = $parts[1];
                                    $val = $this->decode(trim(substr($slice, strlen($parts[0])), ", \t\n\r\0\x0B"));

                                    if ($this->use & SERVICES_JSON_LOOSE_TYPE) {
                                        $obj[$key] = $val;
                                    } else {
                                        $obj->$key = $val;
                                    }
                                }

                            }

                        } elseif ((($chrs[$c] == '"') || ($chrs[$c] == "'")) && ($top['what'] != SERVICES_JSON_IN_STR)) {
                            // found a quote, and we are not inside a string
                            array_push($stk, array('what' => SERVICES_JSON_IN_STR, 'where' => $c, 'delim' => $chrs[$c]));
                            //print("Found start of string at {$c}\n");

                        } elseif (($chrs[$c] == $top['delim']) &&
                                 ($top['what'] == SERVICES_JSON_IN_STR) &&
                                 (($this->strlen8($this->substr8($chrs, 0, $c)) - $this->strlen8(rtrim($this->substr8($chrs, 0, $c), '\\'))) % 2 != 1)) {
                            // found a quote, we're in a string, and it's not escaped
                            // we know that it's not escaped because there is _not_ an
                            // odd number of backslashes at the end of the string so far
                            array_pop($stk);
                            //print("Found end of string at {$c}: ".$this->substr8($chrs, $top['where'], (1 + 1 + $c - $top['where']))."\n");

                        } elseif (($chrs[$c] == '[') &&
                                 in_array($top['what'], array(SERVICES_JSON_SLICE, SERVICES_JSON_IN_ARR, SERVICES_JSON_IN_OBJ))) {
                            // found a left-bracket, and we are in an array, object, or slice
                            array_push($stk, array('what' => SERVICES_JSON_IN_ARR, 'where' => $c, 'delim' => false));
                            //print("Found start of array at {$c}\n");

                        } elseif (($chrs[$c] == ']') && ($top['what'] == SERVICES_JSON_IN_ARR)) {
                            // found a right-bracket, and we're in an array
                            array_pop($stk);
                            //print("Found end of array at {$c}: ".$this->substr8($chrs, $top['where'], (1 + $c - $top['where']))."\n");

                        } elseif (($chrs[$c] == '{') &&
                                 in_array($top['what'], array(SERVICES_JSON_SLICE, SERVICES_JSON_IN_ARR, SERVICES_JSON_IN_OBJ))) {
                            // found a left-brace, and we are in an array, object, or slice
                            array_push($stk, array('what' => SERVICES_JSON_IN_OBJ, 'where' => $c, 'delim' => false));
                            //print("Found start of object at {$c}\n");

                        } elseif (($chrs[$c] == '}') && ($top['what'] == SERVICES_JSON_IN_OBJ)) {
                            // found a right-brace, and we're in an object
                            array_pop($stk);
                            //print("Found end of object at {$c}: ".$this->substr8($chrs, $top['where'], (1 + $c - $top['where']))."\n");

                        } elseif (($substr_chrs_c_2 == '/*') &&
                                 in_array($top['what'], array(SERVICES_JSON_SLICE, SERVICES_JSON_IN_ARR, SERVICES_JSON_IN_OBJ))) {
                            // found a comment start, and we are in an array, object, or slice
                            array_push($stk, array('what' => SERVICES_JSON_IN_CMT, 'where' => $c, 'delim' => false));
                            $c++;
                            //print("Found start of comment at {$c}\n");

                        } elseif (($substr_chrs_c_2 == '*/') && ($top['what'] == SERVICES_JSON_IN_CMT)) {
                            // found a comment end, and we're in one now
                            array_pop($stk);
                            $c++;

                            for ($i = $top['where']; $i <= $c; ++$i)
                                $chrs = substr_replace($chrs, ' ', $i, 1);

                            //print("Found end of comment at {$c}: ".$this->substr8($chrs, $top['where'], (1 + $c - $top['where']))."\n");

                        }

                    }

                    if (reset($stk) == SERVICES_JSON_IN_ARR) {
                        return $arr;

                    } elseif (reset($stk) == SERVICES_JSON_IN_OBJ) {
                        return $obj;

                    }

                }
        }
    }

    /**
     * @deprecated 5.3.0 Use the PHP native JSON extension instead.
     *
     * @todo Ultimately, this should just call PEAR::isError()
     */
    function isError($data, $code = null)
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        if (class_exists('pear')) {
            return PEAR::isError($data, $code);
        } elseif (is_object($data) && ($data instanceof services_json_error ||
                                 is_subclass_of($data, 'services_json_error'))) {
            return true;
        }

        return false;
    }
    
    /**
     * Calculates length of string in bytes
     *
     * @deprecated 5.3.0 Use the PHP native JSON extension instead.
     *
     * @param string
     * @return integer length
     */
    function strlen8( $str ) 
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        if ( $this->_mb_strlen ) {
            return mb_strlen( $str, "8bit" );
        }
        return strlen( $str );
    }
    
    /**
     * Returns part of a string, interpreting $start and $length as number of bytes.
     *
     * @deprecated 5.3.0 Use the PHP native JSON extension instead.
     *
     * @param string
     * @param integer start
     * @param integer length
     * @return integer length
     */
    function substr8( $string, $start, $length=false ) 
    {
        _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

        if ( $length === false ) {
            $length = $this->strlen8( $string ) - $start;
        }
        if ( $this->_mb_substr ) {
            return mb_substr( $string, $start, $length, "8bit" );
        }
        return substr( $string, $start, $length );
    }

}

if (class_exists('PEAR_Error')) {

    class Services_JSON_Error extends PEAR_Error
    {
        /**
         * PHP5 constructor.
         *
         * @deprecated 5.3.0 Use the PHP native JSON extension instead.
         */
        function __construct($message = 'unknown error', $code = null,
                                     $mode = null, $options = null, $userinfo = null)
        {
            _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );

            parent::PEAR_Error($message, $code, $mode, $options, $userinfo);
        }

        /**
         * PHP4 constructor.
         *
         * @deprecated 5.3.0 Use __construct() instead.
         *
         * @see Services_JSON_Error::__construct()
         */
        public function Services_JSON_Error($message = 'unknown error', $code = null,
                                     $mode = null, $options = null, $userinfo = null) {
            _deprecated_constructor( 'Services_JSON_Error', '5.3.0', get_class( $this ) );
            self::__construct($message, $code, $mode, $options, $userinfo);
        }
    }

} else {

    /**
     * @todo Ultimately, this class shall be descended from PEAR_Error
     */
    class Services_JSON_Error
    {
        /**
         * PHP5 constructor.
         *
         * @deprecated 5.3.0 Use the PHP native JSON extension instead.
         */
        function __construct( $message = 'unknown error', $code = null,
                                     $mode = null, $options = null, $userinfo = null )
        {
            _deprecated_function( __METHOD__, '5.3.0', 'The PHP native JSON extension' );
        }

        /**
         * PHP4 constructor.
         *
         * @deprecated 5.3.0 Use __construct() instead.
         *
         * @see Services_JSON_Error::__construct()
         */
        public function Services_JSON_Error( $message = 'unknown error', $code = null,
                                         $mode = null, $options = null, $userinfo = null ) {
            _deprecated_constructor( 'Services_JSON_Error', '5.3.0', get_class( $this ) );
            self::__construct( $message, $code, $mode, $options, $userinfo );
        }
    }

}

endif;