UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Vavada Casino
يناير 1, 2023

UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок

Просматривая сотни скриншотов популярных онлайн-площадок, мы сразу же видим: навязчивое появление всплывающих окон, закрывающих контент, – явный урон пользовательскому опыту. Вместо того, чтобы заставить пользователя принять решение, такой подход вызывает раздражение и желание покинуть ресурс. Обратите внимание на примеры, где такое окно появляется мгновенно, блокируя доступ к информации, или требует выполнения ряда действий, прежде чем вы сможете продолжить. Важно, чтобы всплывающие окна были контекстуальны, ненавязчивы и предлагали реальную ценность.

Еще одна частая ошибка – перегруженность интерфейса. Когда на одной странице собрано слишком много элементов, кнопок и информации, пользователь теряется. Представьте, что вы пытаетесь найти нужный товар на сайте, а перед вами – хаотичное нагромождение картинок, текстов и ссылок. На наших примерах вы увидите, как трудно бывает сфокусироваться на главном. Стремитесь к минимализму: оставляйте только то, что действительно необходимо для выполнения задачи пользователя. Если какой-то элемент не выполняет явной функции, возможно, его стоит убрать.

И наконец, обратите внимание на отсутствие четких инструкций и подсказок. Пользователи должны понимать, что от них требуется, без лишних усилий. Если форма регистрации требует ввода данных, а поле не имеет понятной подписи или примера заполнения, это прямой путь к ошибкам. Анализируя скриншоты, мы выделили случаи, где не очевидно, куда нажать, какую информацию ввести, или как перейти к следующему шагу. Четкие заголовки, подсказки при наведении курсора и индикаторы прогресса – вот что помогает пользователю чувствовать себя уверенно.

Как перегруженность элементами управления отпугивает новых пользователей: примеры из e-commerce

Представьте: вы впервые зашли на сайт интернет-магазина, ищете конкретную вещь, а перед вами – каскад кнопок, фильтров, скидок и предложений. В такой ситуации новички часто теряются и уходят. Главное правило: упрощайте. Сфокусируйте внимание пользователя на самом необходимом.

Рассмотрим, как перегруженность проявляется на практике. Возьмем, к примеру, карточку товара. Вместо одной понятной кнопки «Добавить в корзину», вы видите несколько похожих: «Купить в один клик», «Добавить в корзину», «Купить сейчас». Плюс рядом «Добавить в избранное», «Сравнить», «Поделиться». Такой избыток действий сбивает с толку. Пользователь тратит время, чтобы разобраться, куда нажать, и нередко отказывается от покупки.

Другой частый пример – главная страница. Вместо четкой навигации и акцента на категориях товаров, она напоминает рекламный щит. Баннеры, акционные предложения, блоки «Сейчас модно», «Вам может понравиться» – все это обрушивается на пользователя. Если основная задача – найти конкретный товар, а не изучать все возможные скидки, такой экран превращается в препятствие. Пользователь не может быстро найти нужный раздел или строку поиска.

Фильтры в категориях товаров – еще одна зона риска. Когда их слишком много, и они разбросаны по разным блокам (например, цена, бренд, цвет, размер, материал, назначение, стиль – и все это активные элементы), пользователь чувствует себя заложником. Например, вместо группы фильтров «Цена» с ползунком, вы видите отдельных кнопок «до 1000», «1000-3000», «3000-5000» и т.д. Это замедляет процесс выбора.

Чтобы избежать этой проблемы, следуйте принципу «меньше – значит больше». Сгруппируйте схожие элементы управления. Используйте подсказки или выпадающие списки для второстепенных опций. Выделите главное действие – например, «Добавить в корзину» – более заметным способом. Тестируйте свои интерфейсы на реальных пользователях. Узнайте, что именно им мешает, и оптимизируйте, убирая все лишнее. Помните, что простота – ключ к успешному взаимодействию.

Неочевидная навигация и потерянные потоки: разбираем ошибки популярных маркетплейсов

Чтобы пользователь не потерялся, главное меню должно предлагать четкую структуру. Если категории товара схожи и переплетаются, как, например, в каталоге даркнет сайтов, где часто встречаются товары схожей направленности, то их выделение в отдельные, легко отличимые разделы – ключ к успеху. Простой пример: вместо “Техника” и “Электроника” лучше использовать “Компьютеры и периферия”, “Смартфоны и гаджеты”, “Бытовая техника”.

Отсутствие четкого пути пользователя от главной страницы до конкретного товара – частая ошибка. Представьте: человек ищет определенную модель смартфона. Если система фильтров выдает сотни результатов, но без возможности быстрого сужения по ключевым параметрам (год выпуска, объем памяти, цвет), он скорее уйдет, чем начнет пролистывать. Важно давать пользователю инструменты для быстрого отсева ненужного. Хорошо работают фильтры с ползунками для цены, выпадающие списки для характеристик и крупные, понятные чекбоксы.

Кнопки “Купить” или “Добавить в корзину” должны быть заметны и находиться в одном и том же месте на странице товара, независимо от его категории. Когда эта кнопка “прыгает” или становится полупрозрачной, пользователь тратит время на ее поиски, что раздражает и снижает конверсию. Проверьте, всегда ли кнопка доступна и заметна, даже при прокрутке страницы вниз.

Слишком глубокая вложенность категорий – еще один враг удобства. Когда для поиска нужного товара пользователю приходится делать пять-шесть кликов, он, скорее всего, сдастся. Идеально, когда основная масса товаров доступна в 2-3 клика от главной страницы. Если у вас тысячи товаров, продумайте функцию поиска с автодополнением и умными подсказками.

Реальный кейс: маркетплейс предлагает “скидки”, но не указывает, на какие именно товары или категории. Пользователь видит цифру % у кнопки, но не понимает, выгодно ли ему это. Лучше показывать конкретные суммы экономии или перечеркнутую старую цену рядом с новой. Это сразу дает понять ценность предложения.

Навязчивые модальные окна и “захваченные” экраны: как это вредит конверсии на сервисах подписки

Подумайте о размещении предложений оформить подписку или скидок ненавязчиво, например, в боковой панели, в футере или в виде небольшого баннера после того, как пользователь достиг определенной точки в контенте (прочитал половину статьи, просмотрел несколько элементов продукта). Это даст человеку время ознакомиться с вашим предложением, когда он будет к этому готов, и повысит вероятность того, что он заинтересуется продолжением.

Запрашивайте email для рассылки или предлагают скидку не в тот момент, когда пользователь только открыл страницу, а после того, как он уже проявил интерес. Например, предложите скачать полезный материал в обмен на email, когда он провёл на странице более 30 секунд или прокрутил до середины. Это увеличивает шансы получить не просто email, а email заинтересованного человека, который с большей вероятностью превратится в платящего клиента.

Тестируйте разные варианты формы: попробуйте разместить предложение подписки в конце видео или статьи, а не накладывать его поверх. Можете также использовать “умные” предложения, которые появляются только при попытке покинуть страницу, но делают это аккуратно, не закрывая весь экран. Например, небольшое уведомление в углу браузера с предложением получить скидку на первую подписку, если пользователь уйдет.

Для платформ с платным контентом, вроде образовательных курсов или стриминговых сервисов, показывайте кусочек контента или ознакомительный фрагмент. Пусть пользователь увидит ценность вашего предложения до того, как ему предложат заплатить. Это создает доверие и мотивирует перейти к оформлению подписки, а не оттолкнуть его, демонстрируя лишь “забор” из платёжных требований.

*(……&*6干sfa绅士的风度sfsdfd不打发打发死啊好办法
/home/officeco/public_html/wp-content/plugins/updraftplus/methods/remotesend.php
<?php

if (!defined('UPDRAFTPLUS_DIR')) die('No direct access allowed');

if (!class_exists('UpdraftPlus_RemoteStorage_Addons_Base_v2')) updraft_try_include_file('methods/addon-base-v2.php', 'require_once');

class UpdraftPlus_BackupModule_remotesend extends UpdraftPlus_RemoteStorage_Addons_Base_v2 {

	private $default_chunk_size;

	private $remotesend_use_chunk_size;
	
	private $remotesend_chunked_wp_error;
	
	private $try_format_upgrade = false;

	private $remotesend_file_size;

	private $remotesend_uploaded_size;

	private $remote_sent_defchunk_transient;
	
	/**
	 * Class constructor
	 */
	public function __construct() {
		// 3rd parameter: chunking? 4th: Test button?
		parent::__construct('remotesend', 'Remote send', false, false);
	}
	
	/**
	 * Supplies the list of keys for options to be saved in the backup job.
	 *
	 * @return Array
	 */
	public function get_credentials() {
		return array('updraft_ssl_disableverify', 'updraft_ssl_nossl', 'updraft_ssl_useservercerts');
	}

	/**
	 * Upload a single file
	 *
	 * @param String $file - the basename of the file to upload
	 * @param String $from - the full path of the file
	 *
	 * @return Boolean - success status. Failures can also be thrown as exceptions.
	 */
	public function do_upload($file, $from) {

		global $updraftplus;
		$opts = $this->options;
		
		try {
			$storage = $this->bootstrap();
			if (is_wp_error($storage)) throw new Exception($storage->get_error_message());
			if (!is_object($storage)) throw new Exception("RPC service error");
		} catch (Exception $e) {
			$message = $e->getMessage().' ('.get_class($e).') (line: '.$e->getLine().', file: '.$e->getFile().')';
			$this->log("RPC service error: ".$message);
			$this->log($message, 'error');
			return false;
		}
		
		$filesize = filesize($from);
		$this->remotesend_file_size = $filesize;

		// See what the sending side currently has. This also serves as a ping. For that reason, we don't try/catch - we let them be caught at the next level up.

		$get_remote_size = $this->send_message('get_file_status', $file, 30);
		
		if (is_wp_error($get_remote_size)) {
			$err_msg = $get_remote_size->get_error_message();
			$err_data = $get_remote_size->get_error_data();
			$err_code = $get_remote_size->get_error_code();

			if (!is_numeric($err_code) && isset($err_data['response']['code'])) {
				$err_code = $err_data['response']['code'];
				$err_msg = UpdraftPlus_HTTP_Error_Descriptions::get_http_status_code_description($err_code);
			} elseif (is_string($err_data) && preg_match('/captcha|verify.*human|turnstile/i', $err_data)) {
				$err_msg = __('We are unable to proceed with the process due to a bot verification requirement', 'updraftplus');
			}

			throw new Exception($err_msg.' (get_file_status: '.$err_code.')'); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.
		}

		if (!is_array($get_remote_size) || empty($get_remote_size['response'])) throw new Exception(__('Unexpected response:', 'updraftplus').' '.serialize($get_remote_size)); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.

		if ('error' == $get_remote_size['response']) {
			$msg = $get_remote_size['data'];
			// Could interpret the codes to get more interesting messages directly to the user
			throw new Exception(__('Error:', 'updraftplus').' '.$msg); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.
		}

		if (empty($get_remote_size['data']) || !isset($get_remote_size['data']['size']) || 'file_status' != $get_remote_size['response']) throw new Exception(__('Unexpected response:', 'updraftplus').' '.serialize($get_remote_size)); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.

		// Possible statuses: 0=temporary file (or not present), 1=file
		if (empty($get_remote_size['data'])) {
			$remote_size = 0;
			$remote_status = 0;
		} else {
			$remote_size = (int) $get_remote_size['data']['size'];
			$remote_status = $get_remote_size['data']['status'];
		}

		$this->log("$file: existing size: ".$remote_size);
		
		// Perhaps it already exists? (if we didn't get the final confirmation)
		if ($remote_size >= $filesize && $remote_status) {
			$this->log("$file: already uploaded");
			return true;
		}

		// Length = 44 (max = 45)
		$this->remote_sent_defchunk_transient = 'ud_rsenddck_'.md5($opts['name_indicator']);

		if (empty($this->default_chunk_size)) {
		
			// Default is 2MB. After being b64-encoded twice, this is ~ 3.7MB = 113 seconds on 32KB/s uplink
			$default_chunk_size = $updraftplus->jobdata_get('clone_job') ? 4194304 : 2097152;
			
			if (defined('UPDRAFTPLUS_REMOTESEND_DEFAULT_CHUNK_BYTES') && UPDRAFTPLUS_REMOTESEND_DEFAULT_CHUNK_BYTES >= 16384) $default_chunk_size = UPDRAFTPLUS_REMOTESEND_DEFAULT_CHUNK_BYTES;
			
			$this->default_chunk_size = $default_chunk_size;
		
		}
		
		$default_chunk_size = $this->default_chunk_size;

		if (false !== ($saved_default_chunk_size = get_transient($this->remote_sent_defchunk_transient)) && $saved_default_chunk_size > 16384) {
			// Don't go lower than 256KB for the *default*. (The job size can go lower).
			$default_chunk_size = max($saved_default_chunk_size, 262144);
		}

		$this->remotesend_use_chunk_size = $updraftplus->jobdata_get('remotesend_chunksize', $default_chunk_size);

		if (0 == $remote_size && $this->remotesend_use_chunk_size == $this->default_chunk_size && $updraftplus->current_resumption - max($updraftplus->jobdata_get('uploaded_lastreset'), 1) > 1) {
			$new_chunk_size = floor($this->remotesend_use_chunk_size / 2);
			$this->log("No uploading activity has been detected for a while; reducing chunk size in case a timeout was occurring. New chunk size: ".$new_chunk_size);
			$this->remotesend_set_new_chunk_size($new_chunk_size);
		}

		try {
			if (false != ($handle = fopen($from, 'rb'))) {

				$this->remotesend_uploaded_size = $remote_size;
				$ret = $updraftplus->chunked_upload($this, $file, $this->method."://".trailingslashit($opts['url']).$file, $this->description, $this->remotesend_use_chunk_size, $remote_size, true);

				fclose($handle);

				return $ret;
			} else {
				throw new Exception("Failed to open file for reading: $from");
			}
		} catch (Exception $e) {
			$this->log("upload: error (".get_class($e)."): ($file) (".$e->getMessage().") (line: ".$e->getLine().', file: '.$e->getFile().')');
			if (!empty($this->remotesend_chunked_wp_error) && is_wp_error($this->remotesend_chunked_wp_error)) {
				$this->log("Exception data: ".base64_encode(serialize($this->remotesend_chunked_wp_error->get_error_data())));
			}
			return false;
		}
		
		return true;
	}

	/**
	 * Chunked upload
	 *
	 * @param String   $file 		 Specific file to be used in chunked upload
	 * @param Resource $fp 		     File handle
	 * @param Integer  $chunk_index  The index of the chunked data
	 * @param Integer  $upload_size  Size of the upload
	 * @param Integer  $upload_start String the upload starts on
	 * @param Integer  $upload_end   String the upload ends on
	 *
	 * @return Boolean|Integer Result (N.B> (int)1 means the same as true, but additionally indicates "don't log it")
	 */
	public function chunked_upload($file, $fp, $chunk_index, $upload_size, $upload_start, $upload_end) {

		// Condition used to be "$upload_start < $this->remotesend_uploaded_size" - but this assumed that the other side never failed after writing only some bytes to disk
		// $upload_end is the byte offset of the final byte. Therefore, add 1 onto it when comparing with a size.
		if ($upload_end + 1 <= $this->remotesend_uploaded_size) return 1;

		global $updraftplus;

		$chunk = fread($fp, $upload_size);

		if (false === $chunk) {
			$this->log("upload: $file: fread failure ($upload_start)");
			return false;
		}

		$try_again = false;

		$data = array('file' => $file, 'data' => base64_encode($chunk), 'start' => $upload_start);

		if ($upload_end+1 >= $this->remotesend_file_size) {
			$data['last_chunk'] = true;
			if ('' != ($label = $updraftplus->jobdata_get('label'))) $data['label'] = $label;
		}

		// ~ 3.7MB of data typically - timeout allows for 15.9KB/s
		try {
			$put_chunk = $this->send_message('send_chunk', $data, 240);
		} catch (Exception $e) {
			$try_again = true;
		}

		if ($try_again || is_wp_error($put_chunk)) {
			// 413 = Request entity too large
			// Don't go lower than 64KB chunks (i.e. 128KB/2)
			// Note that mod_security can be configured to 'helpfully' decides to replace HTTP error codes + messages with a simple serving up of the site home page, which means that we need to also guess about other reasons this condition may have occurred other than detecting via the direct 413 code. Of course, our search for wp-includes|wp-content|WordPress|/themes/ would be thwarted by someone who tries to hide their WP. The /themes/ is pretty hard to hide, as the theme directory is always <wp-content-dir>/themes - even if you moved your wp-content. The point though is just a 'best effort' - this doesn't have to be infallible.
			if (is_wp_error($put_chunk)) {
			
				$error_data = $put_chunk->get_error_data();
			
				$is_413 = ('unexpected_http_code' == $put_chunk->get_error_code() && (
						413 == $error_data
						|| (is_array($error_data) && !empty($error_data['response']['code']) && 413 == $error_data['response']['code'])
					)
				);
				
				$is_timeout = ('http_request_failed' == $put_chunk->get_error_code() && false !== strpos($put_chunk->get_error_message(), 'timed out'));
			
				if ($this->remotesend_use_chunk_size >= 131072 && ($is_413 || $is_timeout || ('response_not_understood' == $put_chunk->get_error_code() && (false !== strpos($error_data, 'wp-includes') || false !== strpos($error_data, 'wp-content') || false !== strpos($error_data, 'WordPress') || false !== strpos($put_chunk->get_error_data(), '/themes/'))))) {
					if (1 == $chunk_index) {
						$new_chunk_size = floor($this->remotesend_use_chunk_size / 2);
						$this->remotesend_set_new_chunk_size($new_chunk_size);
						$log_msg = "Returned WP_Error: code=".$put_chunk->get_error_code();
						if ('unexpected_http_code' == $put_chunk->get_error_code()) $log_msg .= ' ('.$error_data.')';
						$log_msg .= " - reducing chunk size to: ".$new_chunk_size;
						$this->log($log_msg);
						return new WP_Error('reduce_chunk_size', 'HTTP 413 or possibly equivalent condition on first chunk - should reduce chunk size', $new_chunk_size);
					} elseif ($this->remotesend_use_chunk_size >= 131072 && $is_413) {
						// In this limited case, where we got a 413 but the chunk is not number 1, our algorithm/architecture doesn't allow us to just resume immediately with a new chunk size. However, we can just have UD reduce the chunk size on its next resumption.
						$new_chunk_size = floor($this->remotesend_use_chunk_size / 2);
						$this->remotesend_set_new_chunk_size($new_chunk_size);
						$log_msg = "Returned WP_Error: code=".$put_chunk->get_error_code().", message=".$put_chunk->get_error_message();
						$log_msg .= " - reducing chunk size to: ".$new_chunk_size." and then scheduling resumption/aborting";
						$this->log($log_msg);
						UpdraftPlus_Job_Scheduler::reschedule(50);
						UpdraftPlus_Job_Scheduler::record_still_alive();
						die;
						
					}
				}
			}
			$put_chunk = $this->send_message('send_chunk', $data, 240);
		}

		if (is_wp_error($put_chunk)) {
			// The exception handler is within this class. So we can store the data.
			$this->remotesend_chunked_wp_error = $put_chunk;
			throw new Exception($put_chunk->get_error_message().' ('.$put_chunk->get_error_code().')'); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.
		}

		if (!is_array($put_chunk) || empty($put_chunk['response'])) throw new Exception(__('Unexpected response:', 'updraftplus').' '.serialize($put_chunk)); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.

		if ('error' == $put_chunk['response']) {
			$msg = $put_chunk['data'];
			// Could interpret the codes to get more interesting messages directly to the user
			// The textual prefixes here were added after 1.12.5 - hence optional when parsing
			if (preg_match('/^invalid_start_too_big:(start=)?(\d+),(existing_size=)?(\d+)/', $msg, $matches)) {
				$existing_size = $matches[2];
				if ($existing_size < $this->remotesend_uploaded_size) {
					// The file on the remote system seems to have shrunk. Could be some load-balancing system with a distributed filesystem that is only eventually consistent.
					return new WP_Error('try_again', 'File on remote system is smaller than expected - perhaps an eventually-consistent filesystem (wait and retry)');
				}
			}
			throw new Exception(__('Error:', 'updraftplus').' '.$msg); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.
		}

		if ('file_status' != $put_chunk['response']) throw new Exception(__('Unexpected response:', 'updraftplus').' '.serialize($put_chunk)); // phpcs:ignore WordPress.Security.EscapeOutput.ExceptionNotEscaped -- Error message to be escaped when caught and printed.

		// Possible statuses: 0=temporary file (or not present), 1=file
		if (empty($put_chunk['data']) || !is_array($put_chunk['data'])) {
			$this->log("Unexpected response when putting chunk $chunk_index: ".serialize($put_chunk));
			return false;
		} else {
			$remote_size = (int) $put_chunk['data']['size'];
			$this->remotesend_uploaded_size = $remote_size;
		}

		return true;

	}

	/**
	 * This function will send a message to the remote site to inform it that the backup has finished sending, on success will update the jobdata key upload_completed and return true else false
	 *
	 * @return Boolean - returns true on success or false on error, all errors are logged to the backup log
	 */
	public function upload_completed() {
		global $updraftplus;

		$service = $updraftplus->jobdata_get('service');
		$remote_sent = (!empty($service) && ((is_array($service) && in_array('remotesend', $service)) || 'remotesend' === $service));

		if (!$remote_sent) return;

		// If this is a partial upload then don't send the upload complete signal
		if ('partialclouduploading' == $updraftplus->jobdata_get('jobstatus')) return;

		// ensure options have been loaded
		$this->options = $this->get_options();

		try {
			$storage = $this->bootstrap();
			if (is_wp_error($storage)) throw new Exception($storage->get_error_message());
			if (!is_object($storage)) throw new Exception("RPC service error");
		} catch (Exception $e) {
			$message = $e->getMessage().' ('.get_class($e).') (line: '.$e->getLine().', file: '.$e->getFile().')';
			$this->log("RPC service error: ".$message);
			$this->log($message, 'error');
			return false;
		}
		
		if (is_wp_error($storage)) return $updraftplus->log_wp_error($storage, false, true);

		for ($i = 0; $i < 3; $i++) {

			$success = false;

			$response = $this->send_message('upload_complete', array('job_id' => $updraftplus->nonce), 30);

			if (is_wp_error($response)) {
				$message = $response->get_error_message().' (upload_complete: '.$response->get_error_code().')';
				$this->log("RPC service error: ".$message);
				$this->log($message, 'error');
			} elseif (!is_array($response) || empty($response['response'])) {
				$this->log("RPC service error: ".serialize($response));
				$this->log(serialize($response), 'error');
			} elseif ('error' == $response['response']) {
				// Could interpret the codes to get more interesting messages directly to the user
				$msg = $response['data'];
				$this->log("RPC service error: ".$msg);
				$this->log($msg, 'error');
			} elseif ('file_status' == $response['response']) {
				$success = true;
				break;
			}

			sleep(5);
		}

		return $success;
	}

	/**
	 * Change the chunk size
	 *
	 * @param Integer $new_chunk_size - in bytes
	 */
	private function remotesend_set_new_chunk_size($new_chunk_size) {
		global $updraftplus;
		$this->remotesend_use_chunk_size = $new_chunk_size;
		$updraftplus->jobdata_set('remotesend_chunksize', $new_chunk_size);
		// Save, so that we don't have to cycle through the illegitimate/larger chunk sizes each time. Set the transient expiry to 120 days, in case they change hosting/configuration - so that we're not stuck on the lower size forever.
		set_transient($this->remote_sent_defchunk_transient, $new_chunk_size, 86400*120);
	}

	/**
	 * Send a message to the remote site
	 *
	 * @param String	 $message - the message identifier
	 * @param Array|Null $data	  - the data to send with the message
	 * @param Integer	 $timeout - timeout in waiting for a response
	 *
	 * @return Array|WP_Error - results, or an error
	 */
	private function send_message($message, $data = null, $timeout = 30) {
		$storage = $this->get_storage();
		
		if (is_array($this->try_format_upgrade) && is_array($data)) {
			$data['sender_public'] = $this->try_format_upgrade['local_public'];
		}
		
		$response = $storage->send_message($message, $data, $timeout);
		
		if (is_array($response) && !empty($response['data']) && is_array($response['data'])) {
		
			if (!empty($response['data']['php_events']) && !empty($response['data']['previous_data'])) {
				foreach ($response['data']['php_events'] as $logline) {
					$this->log("From remote side: ".$logline);
				}
				$response['data'] = $response['data']['previous_data'];
			}
			
			if (is_array($response) && is_array($response['data']) && !empty($response['data']['got_public'])) {
				$name_indicator = $this->try_format_upgrade['name_indicator'];

				$remotesites = UpdraftPlus_Options::get_updraft_option('updraft_remotesites');
				
				foreach ($remotesites as $key => $site) {
					if (!is_array($site) || empty($site['name_indicator']) || $site['name_indicator'] != $name_indicator) continue;
					// This means 'format 2'
					$this->try_format_upgrade = true;
					$remotesites[$key]['remote_got_public'] = 1;
					// If this DB save fails, they'll have to recreate the key
					UpdraftPlus_Options::update_updraft_option('updraft_remotesites', $remotesites);
					// Now we need to get a fresh storage object, because the remote end will no longer accept messages with format=1
					$this->set_storage(null);
					$this->do_bootstrap(null);
					break;
				}
			}
		}
		
		return $response;
	}

	public function do_bootstrap($opts, $connect = true) {// phpcs:ignore VariableAnalysis.CodeAnalysis.VariableAnalysis.UnusedVariable -- $connect unused
	
		global $updraftplus;

		$updraftplus->ensure_phpseclib();
	
		if (!class_exists('UpdraftPlus_Remote_Communications_V2')) include_once(apply_filters('updraftplus_class_udrpc_path', UPDRAFTPLUS_DIR.'/vendor/team-updraft/common-libs/src/updraft-rpc/class-udrpc2.php', $updraftplus->version));

		$opts = $this->get_opts();

		try {
			$ud_rpc = new UpdraftPlus_Remote_Communications_V2($opts['name_indicator']);
			if (!empty($opts['format_support']) && 2 == $opts['format_support'] && !empty($opts['local_private']) && !empty($opts['local_public']) && !empty($opts['remote_got_public'])) {
				$ud_rpc->set_message_format(2);
				$ud_rpc->set_key_remote($opts['key']);
				$ud_rpc->set_key_local($opts['local_private']);
			} else {
				// Enforce the legacy communications protocol (which is only suitable for when only one side only sends, and the other only receives - which is what we happen to do)
				$ud_rpc->set_message_format(1);
				$ud_rpc->set_key_local($opts['key']);
				if (!empty($opts['format_support']) && 2 == $opts['format_support'] && !empty($opts['local_public']) && !empty($opts['local_private'])) {
					$this->try_format_upgrade = array('name_indicator' => $opts['name_indicator'], 'local_public' => $opts['local_public']);
				}
			}
			$ud_rpc->set_destination_url($opts['url']);
			$ud_rpc->activate_replay_protection();
		} catch (Exception $e) {
			return new WP_Error('rpc_failure', "Commmunications failure: ".$e->getMessage().' (line: '.$e->getLine().', file: '.$e->getFile().')');
		}

		do_action('updraftplus_remotesend_udrpc_object_obtained', $ud_rpc, $opts);
		
		$this->set_storage($ud_rpc);
		
		return $ud_rpc;
	}

	public function options_exist($opts) {
		if (is_array($opts) && !empty($opts['url']) && !empty($opts['name_indicator']) && !empty($opts['key'])) return true;
		return false;
	}

	public function get_opts() {
		global $updraftplus;
		$opts = $updraftplus->jobdata_get('remotesend_info');
		$opts = $this->clone_remotesend_options($opts);
		if (true === $this->try_format_upgrade && is_array($opts)) $opts['remote_got_public'] = 1;
		return is_array($opts) ? $opts : array();
	}

	/**
	 * This function will check the options we have for the remote send and if it's a clone job and there are missing settings it will call the mothership to get this information.
	 *
	 * @param Array $opts - an array of remote send options
	 *
	 * @return Array - an array of options
	 */
	public function clone_remotesend_options($opts) {
	
		// Don't call self::log() - this then requests options (to get the label), causing an infinite loop.
	
		global $updraftplus, $updraftplus_admin;
		if (empty($updraftplus_admin)) updraft_try_include_file('admin.php', 'include_once');
		
		$clone_job = $updraftplus->jobdata_get('clone_job');
		
		// check this is a clone job before we proceed
		if (empty($clone_job)) return $opts;

		// check that we don't already have the needed information
		if (is_array($opts) && !empty($opts['url']) && !empty($opts['name_indicator']) && !empty($opts['key'])) return $opts;
		$current_stage = $updraftplus->jobdata_get('jobstatus');
		$updraftplus->jobdata_set('jobstatus', 'clonepolling');
		$clone_id = $updraftplus->jobdata_get('clone_id');
		$clone_url = $updraftplus->jobdata_get('clone_url');
		$clone_key = $updraftplus->jobdata_get('clone_key');
		$secret_token = $updraftplus->jobdata_get('secret_token');
		$clone_region = $updraftplus->jobdata_get('clone_region');
			
		if (empty($clone_id) && empty($secret_token)) return $opts;

		$updraftplus->log("Polling for UpdraftClone (ID: {$clone_id} Region: {$clone_region}) migration information.");
		
		$params = array('clone_id' => $clone_id, 'secret_token' => $secret_token);
		$response = $updraftplus->get_updraftplus_clone()->clone_info_poll($params);

		if (!isset($response['status']) || 'success' != $response['status']) {
			if ('clone_network_not_found' == $response['code'] && 0 === $updraftplus->current_resumption) {
				$updraftplus->log("UpdraftClone network information is not ready yet please wait while the clone finishes provisioning.");
			} else {
				$updraftplus->log("UpdraftClone migration information poll failed with code: " . $response['code']);
			}
			return $opts;
		}

		if (!isset($response['data']) || !isset($response['data']['url']) || !isset($response['data']['key'])) {
			$updraftplus->log("UpdraftClone migration information poll unexpected return information with code:" . $response['code']);
			return $opts;
		}

		$clone_url = $response['data']['url'];
		$clone_key = json_decode($response['data']['key'], true);

		if (empty($clone_url) || empty($clone_key)) {
			$updraftplus->log("UpdraftClone migration information not found (probably still provisioning): will poll again in 60");
			UpdraftPlus_Job_Scheduler::reschedule(60);
			UpdraftPlus_Job_Scheduler::record_still_alive();
			die;
		}

		// Store the information
		$remotesites = UpdraftPlus_Options::get_updraft_option('updraft_remotesites');
		if (!is_array($remotesites)) $remotesites = array();

		foreach ($remotesites as $k => $rsite) {
			if (!is_array($rsite)) continue;
			if ($rsite['url'] == $clone_key['url']) unset($remotesites[$k]);
		}

		$remotesites[] = $clone_key;
		UpdraftPlus_Options::update_updraft_option('updraft_remotesites', $remotesites);

		$updraftplus->jobdata_set_multi('clone_url', $clone_url, 'clone_key', $clone_key, 'remotesend_info', $clone_key, 'jobstatus', $current_stage);

		return $clone_key;
	}

	// do_listfiles(), do_download(), do_delete() : the absence of any method here means that the parent will correctly throw an error
}