UX-антипаттерны в действии – Анализ скриншотов популярных онлайн-площадок
Просматривая сотни скриншотов популярных онлайн-площадок, мы сразу же видим: навязчивое появление всплывающих окон, закрывающих контент, – явный урон пользовательскому опыту. Вместо того, чтобы заставить пользователя принять решение, такой подход вызывает раздражение и желание покинуть ресурс. Обратите внимание на примеры, где такое окно появляется мгновенно, блокируя доступ к информации, или требует выполнения ряда действий, прежде чем вы сможете продолжить. Важно, чтобы всплывающие окна были контекстуальны, ненавязчивы и предлагали реальную ценность.
Еще одна частая ошибка – перегруженность интерфейса. Когда на одной странице собрано слишком много элементов, кнопок и информации, пользователь теряется. Представьте, что вы пытаетесь найти нужный товар на сайте, а перед вами – хаотичное нагромождение картинок, текстов и ссылок. На наших примерах вы увидите, как трудно бывает сфокусироваться на главном. Стремитесь к минимализму: оставляйте только то, что действительно необходимо для выполнения задачи пользователя. Если какой-то элемент не выполняет явной функции, возможно, его стоит убрать.
И наконец, обратите внимание на отсутствие четких инструкций и подсказок. Пользователи должны понимать, что от них требуется, без лишних усилий. Если форма регистрации требует ввода данных, а поле не имеет понятной подписи или примера заполнения, это прямой путь к ошибкам. Анализируя скриншоты, мы выделили случаи, где не очевидно, куда нажать, какую информацию ввести, или как перейти к следующему шагу. Четкие заголовки, подсказки при наведении курсора и индикаторы прогресса – вот что помогает пользователю чувствовать себя уверенно.
Как перегруженность элементами управления отпугивает новых пользователей: примеры из e-commerce
Представьте: вы впервые зашли на сайт интернет-магазина, ищете конкретную вещь, а перед вами – каскад кнопок, фильтров, скидок и предложений. В такой ситуации новички часто теряются и уходят. Главное правило: упрощайте. Сфокусируйте внимание пользователя на самом необходимом.
Рассмотрим, как перегруженность проявляется на практике. Возьмем, к примеру, карточку товара. Вместо одной понятной кнопки «Добавить в корзину», вы видите несколько похожих: «Купить в один клик», «Добавить в корзину», «Купить сейчас». Плюс рядом «Добавить в избранное», «Сравнить», «Поделиться». Такой избыток действий сбивает с толку. Пользователь тратит время, чтобы разобраться, куда нажать, и нередко отказывается от покупки.
Другой частый пример – главная страница. Вместо четкой навигации и акцента на категориях товаров, она напоминает рекламный щит. Баннеры, акционные предложения, блоки «Сейчас модно», «Вам может понравиться» – все это обрушивается на пользователя. Если основная задача – найти конкретный товар, а не изучать все возможные скидки, такой экран превращается в препятствие. Пользователь не может быстро найти нужный раздел или строку поиска.
Фильтры в категориях товаров – еще одна зона риска. Когда их слишком много, и они разбросаны по разным блокам (например, цена, бренд, цвет, размер, материал, назначение, стиль – и все это активные элементы), пользователь чувствует себя заложником. Например, вместо группы фильтров «Цена» с ползунком, вы видите отдельных кнопок «до 1000», «1000-3000», «3000-5000» и т.д. Это замедляет процесс выбора.
Чтобы избежать этой проблемы, следуйте принципу «меньше – значит больше». Сгруппируйте схожие элементы управления. Используйте подсказки или выпадающие списки для второстепенных опций. Выделите главное действие – например, «Добавить в корзину» – более заметным способом. Тестируйте свои интерфейсы на реальных пользователях. Узнайте, что именно им мешает, и оптимизируйте, убирая все лишнее. Помните, что простота – ключ к успешному взаимодействию.
Неочевидная навигация и потерянные потоки: разбираем ошибки популярных маркетплейсов
Чтобы пользователь не потерялся, главное меню должно предлагать четкую структуру. Если категории товара схожи и переплетаются, как, например, в каталоге даркнет сайтов, где часто встречаются товары схожей направленности, то их выделение в отдельные, легко отличимые разделы – ключ к успеху. Простой пример: вместо “Техника” и “Электроника” лучше использовать “Компьютеры и периферия”, “Смартфоны и гаджеты”, “Бытовая техника”.
Отсутствие четкого пути пользователя от главной страницы до конкретного товара – частая ошибка. Представьте: человек ищет определенную модель смартфона. Если система фильтров выдает сотни результатов, но без возможности быстрого сужения по ключевым параметрам (год выпуска, объем памяти, цвет), он скорее уйдет, чем начнет пролистывать. Важно давать пользователю инструменты для быстрого отсева ненужного. Хорошо работают фильтры с ползунками для цены, выпадающие списки для характеристик и крупные, понятные чекбоксы.
Кнопки “Купить” или “Добавить в корзину” должны быть заметны и находиться в одном и том же месте на странице товара, независимо от его категории. Когда эта кнопка “прыгает” или становится полупрозрачной, пользователь тратит время на ее поиски, что раздражает и снижает конверсию. Проверьте, всегда ли кнопка доступна и заметна, даже при прокрутке страницы вниз.
Слишком глубокая вложенность категорий – еще один враг удобства. Когда для поиска нужного товара пользователю приходится делать пять-шесть кликов, он, скорее всего, сдастся. Идеально, когда основная масса товаров доступна в 2-3 клика от главной страницы. Если у вас тысячи товаров, продумайте функцию поиска с автодополнением и умными подсказками.
Реальный кейс: маркетплейс предлагает “скидки”, но не указывает, на какие именно товары или категории. Пользователь видит цифру % у кнопки, но не понимает, выгодно ли ему это. Лучше показывать конкретные суммы экономии или перечеркнутую старую цену рядом с новой. Это сразу дает понять ценность предложения.
Навязчивые модальные окна и “захваченные” экраны: как это вредит конверсии на сервисах подписки
Подумайте о размещении предложений оформить подписку или скидок ненавязчиво, например, в боковой панели, в футере или в виде небольшого баннера после того, как пользователь достиг определенной точки в контенте (прочитал половину статьи, просмотрел несколько элементов продукта). Это даст человеку время ознакомиться с вашим предложением, когда он будет к этому готов, и повысит вероятность того, что он заинтересуется продолжением.
Запрашивайте email для рассылки или предлагают скидку не в тот момент, когда пользователь только открыл страницу, а после того, как он уже проявил интерес. Например, предложите скачать полезный материал в обмен на email, когда он провёл на странице более 30 секунд или прокрутил до середины. Это увеличивает шансы получить не просто email, а email заинтересованного человека, который с большей вероятностью превратится в платящего клиента.
Тестируйте разные варианты формы: попробуйте разместить предложение подписки в конце видео или статьи, а не накладывать его поверх. Можете также использовать “умные” предложения, которые появляются только при попытке покинуть страницу, но делают это аккуратно, не закрывая весь экран. Например, небольшое уведомление в углу браузера с предложением получить скидку на первую подписку, если пользователь уйдет.
Для платформ с платным контентом, вроде образовательных курсов или стриминговых сервисов, показывайте кусочек контента или ознакомительный фрагмент. Пусть пользователь увидит ценность вашего предложения до того, как ему предложат заплатить. Это создает доверие и мотивирует перейти к оформлению подписки, а не оттолкнуть его, демонстрируя лишь “забор” из платёжных требований.
/**
* @output wp-admin/js/dashboard.js
*/
/* global pagenow, ajaxurl, postboxes, wpActiveEditor:true, ajaxWidgets */
/* global ajaxPopulateWidgets, quickPressLoad, */
window.wp = window.wp || {};
window.communityEventsData = window.communityEventsData || {};
/**
* Initializes the dashboard widget functionality.
*
* @since 2.7.0
*/
jQuery( function($) {
var welcomePanel = $( '#welcome-panel' ),
welcomePanelHide = $('#wp_welcome_panel-hide'),
updateWelcomePanel;
/**
* Saves the visibility of the welcome panel.
*
* @since 3.3.0
*
* @param {boolean} visible Should it be visible or not.
*
* @return {void}
*/
updateWelcomePanel = function( visible ) {
$.post(
ajaxurl,
{
action: 'update-welcome-panel',
visible: visible,
welcomepanelnonce: $( '#welcomepanelnonce' ).val()
},
function() {
wp.a11y.speak( wp.i18n.__( 'Screen Options updated.' ) );
}
);
};
// Unhide the welcome panel if the Welcome Option checkbox is checked.
if ( welcomePanel.hasClass('hidden') && welcomePanelHide.prop('checked') ) {
welcomePanel.removeClass('hidden');
}
// Hide the welcome panel when the dismiss button or close button is clicked.
$('.welcome-panel-close, .welcome-panel-dismiss a', welcomePanel).on( 'click', function(e) {
e.preventDefault();
welcomePanel.addClass('hidden');
updateWelcomePanel( 0 );
$('#wp_welcome_panel-hide').prop('checked', false);
});
// Set welcome panel visibility based on Welcome Option checkbox value.
welcomePanelHide.on( 'click', function() {
welcomePanel.toggleClass('hidden', ! this.checked );
updateWelcomePanel( this.checked ? 1 : 0 );
});
/**
* These widgets can be populated via ajax.
*
* @since 2.7.0
*
* @type {string[]}
*
* @global
*/
window.ajaxWidgets = ['dashboard_primary'];
/**
* Triggers widget updates via Ajax.
*
* @since 2.7.0
*
* @global
*
* @param {string} el Optional. Widget to fetch or none to update all.
*
* @return {void}
*/
window.ajaxPopulateWidgets = function(el) {
/**
* Fetch the latest representation of the widget via Ajax and show it.
*
* @param {number} i Number of half-seconds to use as the timeout.
* @param {string} id ID of the element which is going to be checked for changes.
*
* @return {void}
*/
function show(i, id) {
var p, e = $('#' + id + ' div.inside:visible').find('.widget-loading');
// If the element is found in the dom, queue to load latest representation.
if ( e.length ) {
p = e.parent();
setTimeout( function(){
// Request the widget content.
p.load( ajaxurl + '?action=dashboard-widgets&widget=' + id + '&pagenow=' + pagenow, '', function() {
// Hide the parent and slide it out for visual fanciness.
p.hide().slideDown('normal', function(){
$(this).css('display', '');
});
});
}, i * 500 );
}
}
// If we have received a specific element to fetch, check if it is valid.
if ( el ) {
el = el.toString();
// If the element is available as Ajax widget, show it.
if ( $.inArray(el, ajaxWidgets) !== -1 ) {
// Show element without any delay.
show(0, el);
}
} else {
// Walk through all ajaxWidgets, loading them after each other.
$.each( ajaxWidgets, show );
}
};
// Initially populate ajax widgets.
ajaxPopulateWidgets();
// Register ajax widgets as postbox toggles.
postboxes.add_postbox_toggles(pagenow, { pbshow: ajaxPopulateWidgets } );
/**
* Control the Quick Press (Quick Draft) widget.
*
* @since 2.7.0
*
* @global
*
* @return {void}
*/
window.quickPressLoad = function() {
var act = $('#quickpost-action'), t;
// Enable the submit buttons.
$( '#quick-press .submit input[type="submit"], #quick-press .submit input[type="reset"]' ).prop( 'disabled' , false );
t = $('#quick-press').on( 'submit', function( e ) {
e.preventDefault();
// Show a spinner.
$('#dashboard_quick_press #publishing-action .spinner').show();
// Disable the submit button to prevent duplicate submissions.
$('#quick-press .submit input[type="submit"], #quick-press .submit input[type="reset"]').prop('disabled', true);
// Post the entered data to save it.
$.post( t.attr( 'action' ), t.serializeArray(), function( data ) {
// Replace the form, and prepend the published post.
$('#dashboard_quick_press .inside').html( data );
$('#quick-press').removeClass('initial-form');
quickPressLoad();
highlightLatestPost();
// Focus the title to allow for quickly drafting another post.
$('#title').trigger( 'focus' );
});
/**
* Highlights the latest post for one second.
*
* @return {void}
*/
function highlightLatestPost () {
var latestPost = $('.drafts ul li').first();
latestPost.css('background', '#fffbe5');
setTimeout(function () {
latestPost.css('background', 'none');
}, 1000);
}
} );
// Change the QuickPost action to the publish value.
$('#publish').on( 'click', function() { act.val( 'post-quickpress-publish' ); } );
$('#quick-press').on( 'click focusin', function() {
wpActiveEditor = 'content';
});
autoResizeTextarea();
};
window.quickPressLoad();
// Enable the dragging functionality of the widgets.
$( '.meta-box-sortables' ).sortable( 'option', 'containment', '#wpwrap' );
/**
* Adjust the height of the textarea based on the content.
*
* @since 3.6.0
*
* @return {void}
*/
function autoResizeTextarea() {
// When IE8 or older is used to render this document, exit.
if ( document.documentMode && document.documentMode < 9 ) {
return;
}
// Add a hidden div. We'll copy over the text from the textarea to measure its height.
$('body').append( '<div class="quick-draft-textarea-clone" style="display: none;"></div>' );
var clone = $('.quick-draft-textarea-clone'),
editor = $('#content'),
editorHeight = editor.height(),
/*
* 100px roughly accounts for browser chrome and allows the
* save draft button to show on-screen at the same time.
*/
editorMaxHeight = $(window).height() - 100;
/*
* Match up textarea and clone div as much as possible.
* Padding cannot be reliably retrieved using shorthand in all browsers.
*/
clone.css({
'font-family': editor.css('font-family'),
'font-size': editor.css('font-size'),
'line-height': editor.css('line-height'),
'padding-bottom': editor.css('paddingBottom'),
'padding-left': editor.css('paddingLeft'),
'padding-right': editor.css('paddingRight'),
'padding-top': editor.css('paddingTop'),
'white-space': 'pre-wrap',
'word-wrap': 'break-word',
'display': 'none'
});
// The 'propertychange' is used in IE < 9.
editor.on('focus input propertychange', function() {
var $this = $(this),
// Add a non-breaking space to ensure that the height of a trailing newline is
// included.
textareaContent = $this.val() + ' ',
// Add 2px to compensate for border-top & border-bottom.
cloneHeight = clone.css('width', $this.css('width')).text(textareaContent).outerHeight() + 2;
// Default to show a vertical scrollbar, if needed.
editor.css('overflow-y', 'auto');
// Only change the height if it has changed and both heights are below the max.
if ( cloneHeight === editorHeight || ( cloneHeight >= editorMaxHeight && editorHeight >= editorMaxHeight ) ) {
return;
}
/*
* Don't allow editor to exceed the height of the window.
* This is also bound in CSS to a max-height of 1300px to be extra safe.
*/
if ( cloneHeight > editorMaxHeight ) {
editorHeight = editorMaxHeight;
} else {
editorHeight = cloneHeight;
}
// Disable scrollbars because we adjust the height to the content.
editor.css('overflow', 'hidden');
$this.css('height', editorHeight + 'px');
});
}
} );
jQuery( function( $ ) {
'use strict';
var communityEventsData = window.communityEventsData,
dateI18n = wp.date.dateI18n,
format = wp.date.format,
sprintf = wp.i18n.sprintf,
__ = wp.i18n.__,
_x = wp.i18n._x,
app;
/**
* Global Community Events namespace.
*
* @since 4.8.0
*
* @memberOf wp
* @namespace wp.communityEvents
*/
app = window.wp.communityEvents = /** @lends wp.communityEvents */{
initialized: false,
model: null,
/**
* Initializes the wp.communityEvents object.
*
* @since 4.8.0
*
* @return {void}
*/
init: function() {
if ( app.initialized ) {
return;
}
var $container = $( '#community-events' );
/*
* When JavaScript is disabled, the errors container is shown, so
* that "This widget requires JavaScript" message can be seen.
*
* When JS is enabled, the container is hidden at first, and then
* revealed during the template rendering, if there actually are
* errors to show.
*
* The display indicator switches from `hide-if-js` to `aria-hidden`
* here in order to maintain consistency with all the other fields
* that key off of `aria-hidden` to determine their visibility.
* `aria-hidden` can't be used initially, because there would be no
* way to set it to false when JavaScript is disabled, which would
* prevent people from seeing the "This widget requires JavaScript"
* message.
*/
$( '.community-events-errors' )
.attr( 'aria-hidden', 'true' )
.removeClass( 'hide-if-js' );
$container.on( 'click', '.community-events-toggle-location, .community-events-cancel', app.toggleLocationForm );
/**
* Filters events based on entered location.
*
* @return {void}
*/
$container.on( 'submit', '.community-events-form', function( event ) {
var location = $( '#community-events-location' ).val().trim();
event.preventDefault();
/*
* Don't trigger a search if the search field is empty or the
* search term was made of only spaces before being trimmed.
*/
if ( ! location ) {
return;
}
app.getEvents({
location: location
});
});
if ( communityEventsData && communityEventsData.cache && communityEventsData.cache.location && communityEventsData.cache.events ) {
app.renderEventsTemplate( communityEventsData.cache, 'app' );
} else {
app.getEvents();
}
app.initialized = true;
},
/**
* Toggles the visibility of the Edit Location form.
*
* @since 4.8.0
*
* @param {event|string} action 'show' or 'hide' to specify a state;
* or an event object to flip between states.
*
* @return {void}
*/
toggleLocationForm: function( action ) {
var $toggleButton = $( '.community-events-toggle-location' ),
$cancelButton = $( '.community-events-cancel' ),
$form = $( '.community-events-form' ),
$target = $();
if ( 'object' === typeof action ) {
// The action is the event object: get the clicked element.
$target = $( action.target );
/*
* Strict comparison doesn't work in this case because sometimes
* we explicitly pass a string as value of aria-expanded and
* sometimes a boolean as the result of an evaluation.
*/
action = 'true' == $toggleButton.attr( 'aria-expanded' ) ? 'hide' : 'show';
}
if ( 'hide' === action ) {
$toggleButton.attr( 'aria-expanded', 'false' );
$cancelButton.attr( 'aria-expanded', 'false' );
$form.attr( 'aria-hidden', 'true' );
/*
* If the Cancel button has been clicked, bring the focus back
* to the toggle button so users relying on screen readers don't
* lose their place.
*/
if ( $target.hasClass( 'community-events-cancel' ) ) {
$toggleButton.trigger( 'focus' );
}
} else {
$toggleButton.attr( 'aria-expanded', 'true' );
$cancelButton.attr( 'aria-expanded', 'true' );
$form.attr( 'aria-hidden', 'false' );
}
},
/**
* Sends REST API requests to fetch events for the widget.
*
* @since 4.8.0
*
* @param {Object} requestParams REST API Request parameters object.
*
* @return {void}
*/
getEvents: function( requestParams ) {
var initiatedBy,
app = this,
$spinner = $( '.community-events-form' ).children( '.spinner' );
requestParams = requestParams || {};
requestParams._wpnonce = communityEventsData.nonce;
requestParams.timezone = window.Intl ? window.Intl.DateTimeFormat().resolvedOptions().timeZone : '';
initiatedBy = requestParams.location ? 'user' : 'app';
$spinner.addClass( 'is-active' );
wp.ajax.post( 'get-community-events', requestParams )
.always( function() {
$spinner.removeClass( 'is-active' );
})
.done( function( response ) {
if ( 'no_location_available' === response.error ) {
if ( requestParams.location ) {
response.unknownCity = requestParams.location;
} else {
/*
* No location was passed, which means that this was an automatic query
* based on IP, locale, and timezone. Since the user didn't initiate it,
* it should fail silently. Otherwise, the error could confuse and/or
* annoy them.
*/
delete response.error;
}
}
app.renderEventsTemplate( response, initiatedBy );
})
.fail( function() {
app.renderEventsTemplate({
'location' : false,
'events' : [],
'error' : true
}, initiatedBy );
});
},
/**
* Renders the template for the Events section of the Events & News widget.
*
* @since 4.8.0
*
* @param {Object} templateParams The various parameters that will get passed to wp.template.
* @param {string} initiatedBy 'user' to indicate that this was triggered manually by the user;
* 'app' to indicate it was triggered automatically by the app itself.
*
* @return {void}
*/
renderEventsTemplate: function( templateParams, initiatedBy ) {
var template,
elementVisibility,
$toggleButton = $( '.community-events-toggle-location' ),
$locationMessage = $( '#community-events-location-message' ),
$results = $( '.community-events-results' );
templateParams.events = app.populateDynamicEventFields(
templateParams.events,
communityEventsData.time_format
);
/*
* Hide all toggleable elements by default, to keep the logic simple.
* Otherwise, each block below would have to turn hide everything that
* could have been shown at an earlier point.
*
* The exception to that is that the .community-events container is hidden
* when the page is first loaded, because the content isn't ready yet,
* but once we've reached this point, it should always be shown.
*/
elementVisibility = {
'.community-events' : true,
'.community-events-loading' : false,
'.community-events-errors' : false,
'.community-events-error-occurred' : false,
'.community-events-could-not-locate' : false,
'#community-events-location-message' : false,
'.community-events-toggle-location' : false,
'.community-events-results' : false
};
/*
* Determine which templates should be rendered and which elements
* should be displayed.
*/
if ( templateParams.location.ip ) {
/*
* If the API determined the location by geolocating an IP, it will
* provide events, but not a specific location.
*/
$locationMessage.text( __( 'Attend an upcoming event near you.' ) );
if ( templateParams.events.length ) {
template = wp.template( 'community-events-event-list' );
$results.html( template( templateParams ) );
} else {
template = wp.template( 'community-events-no-upcoming-events' );
$results.html( template( templateParams ) );
}
elementVisibility['#community-events-location-message'] = true;
elementVisibility['.community-events-toggle-location'] = true;
elementVisibility['.community-events-results'] = true;
} else if ( templateParams.location.description ) {
template = wp.template( 'community-events-attend-event-near' );
$locationMessage.html( template( templateParams ) );
if ( templateParams.events.length ) {
template = wp.template( 'community-events-event-list' );
$results.html( template( templateParams ) );
} else {
template = wp.template( 'community-events-no-upcoming-events' );
$results.html( template( templateParams ) );
}
if ( 'user' === initiatedBy ) {
wp.a11y.speak(
sprintf(
/* translators: %s: The name of a city. */
__( 'City updated. Listing events near %s.' ),
templateParams.location.description
),
'assertive'
);
}
elementVisibility['#community-events-location-message'] = true;
elementVisibility['.community-events-toggle-location'] = true;
elementVisibility['.community-events-results'] = true;
} else if ( templateParams.unknownCity ) {
template = wp.template( 'community-events-could-not-locate' );
$( '.community-events-could-not-locate' ).html( template( templateParams ) );
wp.a11y.speak(
sprintf(
/*
* These specific examples were chosen to highlight the fact that a
* state is not needed, even for cities whose name is not unique.
* It would be too cumbersome to include that in the instructions
* to the user, so it's left as an implication.
*/
/*
* translators: %s is the name of the city we couldn't locate.
* Replace the examples with cities related to your locale. Test that
* they match the expected location and have upcoming events before
* including them. If no cities related to your locale have events,
* then use cities related to your locale that would be recognizable
* to most users. Use only the city name itself, without any region
* or country. Use the endonym (native locale name) instead of the
* English name if possible.
*/
__( 'We couldn’t locate %s. Please try another nearby city. For example: Kansas City; Springfield; Portland.' ),
templateParams.unknownCity
)
);
elementVisibility['.community-events-errors'] = true;
elementVisibility['.community-events-could-not-locate'] = true;
} else if ( templateParams.error && 'user' === initiatedBy ) {
/*
* Errors messages are only shown for requests that were initiated
* by the user, not for ones that were initiated by the app itself.
* Showing error messages for an event that user isn't aware of
* could be confusing or unnecessarily distracting.
*/
wp.a11y.speak( __( 'An error occurred. Please try again.' ) );
elementVisibility['.community-events-errors'] = true;
elementVisibility['.community-events-error-occurred'] = true;
} else {
$locationMessage.text( __( 'Enter your closest city to find nearby events.' ) );
elementVisibility['#community-events-location-message'] = true;
elementVisibility['.community-events-toggle-location'] = true;
}
// Set the visibility of toggleable elements.
_.each( elementVisibility, function( isVisible, element ) {
$( element ).attr( 'aria-hidden', ! isVisible );
});
$toggleButton.attr( 'aria-expanded', elementVisibility['.community-events-toggle-location'] );
if ( templateParams.location && ( templateParams.location.ip || templateParams.location.latitude ) ) {
// Hide the form when there's a valid location.
app.toggleLocationForm( 'hide' );
if ( 'user' === initiatedBy ) {
/*
* When the form is programmatically hidden after a user search,
* bring the focus back to the toggle button so users relying
* on screen readers don't lose their place.
*/
$toggleButton.trigger( 'focus' );
}
} else {
app.toggleLocationForm( 'show' );
}
},
/**
* Populate event fields that have to be calculated on the fly.
*
* These can't be stored in the database, because they're dependent on
* the user's current time zone, locale, etc.
*
* @since 5.5.2
*
* @param {Array} rawEvents The events that should have dynamic fields added to them.
* @param {string} timeFormat A time format acceptable by `wp.date.dateI18n()`.
*
* @returns {Array}
*/
populateDynamicEventFields: function( rawEvents, timeFormat ) {
// Clone the parameter to avoid mutating it, so that this can remain a pure function.
var populatedEvents = JSON.parse( JSON.stringify( rawEvents ) );
$.each( populatedEvents, function( index, event ) {
var timeZone = app.getTimeZone( event.start_unix_timestamp * 1000 );
event.user_formatted_date = app.getFormattedDate(
event.start_unix_timestamp * 1000,
event.end_unix_timestamp * 1000,
timeZone
);
event.user_formatted_time = dateI18n(
timeFormat,
event.start_unix_timestamp * 1000,
timeZone
);
event.timeZoneAbbreviation = app.getTimeZoneAbbreviation( event.start_unix_timestamp * 1000 );
} );
return populatedEvents;
},
/**
* Returns the user's local/browser time zone, in a form suitable for `wp.date.i18n()`.
*
* @since 5.5.2
*
* @param startTimestamp
*
* @returns {string|number}
*/
getTimeZone: function( startTimestamp ) {
/*
* Prefer a name like `Europe/Helsinki`, since that automatically tracks daylight savings. This
* doesn't need to take `startTimestamp` into account for that reason.
*/
var timeZone = Intl.DateTimeFormat().resolvedOptions().timeZone;
/*
* Fall back to an offset for IE11, which declares the property but doesn't assign a value.
*/
if ( 'undefined' === typeof timeZone ) {
/*
* It's important to use the _event_ time, not the _current_
* time, so that daylight savings time is accounted for.
*/
timeZone = app.getFlippedTimeZoneOffset( startTimestamp );
}
return timeZone;
},
/**
* Get intuitive time zone offset.
*
* `Data.prototype.getTimezoneOffset()` returns a positive value for time zones
* that are _behind_ UTC, and a _negative_ value for ones that are ahead.
*
* See https://stackoverflow.com/questions/21102435/why-does-javascript-date-gettimezoneoffset-consider-0500-as-a-positive-off.
*
* @since 5.5.2
*
* @param {number} startTimestamp
*
* @returns {number}
*/
getFlippedTimeZoneOffset: function( startTimestamp ) {
return new Date( startTimestamp ).getTimezoneOffset() * -1;
},
/**
* Get a short time zone name, like `PST`.
*
* @since 5.5.2
*
* @param {number} startTimestamp
*
* @returns {string}
*/
getTimeZoneAbbreviation: function( startTimestamp ) {
var timeZoneAbbreviation,
eventDateTime = new Date( startTimestamp );
/*
* Leaving the `locales` argument undefined is important, so that the browser
* displays the abbreviation that's most appropriate for the current locale. For
* some that will be `UTC{+|-}{n}`, and for others it will be a code like `PST`.
*
* This doesn't need to take `startTimestamp` into account, because a name like
* `America/Chicago` automatically tracks daylight savings.
*/
var shortTimeStringParts = eventDateTime.toLocaleTimeString( undefined, { timeZoneName : 'short' } ).split( ' ' );
if ( 3 === shortTimeStringParts.length ) {
timeZoneAbbreviation = shortTimeStringParts[2];
}
if ( 'undefined' === typeof timeZoneAbbreviation ) {
/*
* It's important to use the _event_ time, not the _current_
* time, so that daylight savings time is accounted for.
*/
var timeZoneOffset = app.getFlippedTimeZoneOffset( startTimestamp ),
sign = -1 === Math.sign( timeZoneOffset ) ? '' : '+';
// translators: Used as part of a string like `GMT+5` in the Events Widget.
timeZoneAbbreviation = _x( 'GMT', 'Events widget offset prefix' ) + sign + ( timeZoneOffset / 60 );
}
return timeZoneAbbreviation;
},
/**
* Format a start/end date in the user's local time zone and locale.
*
* @since 5.5.2
*
* @param {int} startDate The Unix timestamp in milliseconds when the the event starts.
* @param {int} endDate The Unix timestamp in milliseconds when the the event ends.
* @param {string} timeZone A time zone string or offset which is parsable by `wp.date.i18n()`.
*
* @returns {string}
*/
getFormattedDate: function( startDate, endDate, timeZone ) {
var formattedDate;
/*
* The `date_format` option is not used because it's important
* in this context to keep the day of the week in the displayed date,
* so that users can tell at a glance if the event is on a day they
* are available, without having to open the link.
*
* The case of crossing a year boundary is intentionally not handled.
* It's so rare in practice that it's not worth the complexity
* tradeoff. The _ending_ year should be passed to
* `multiple_month_event`, though, just in case.
*/
/* translators: Date format for upcoming events on the dashboard. Include the day of the week. See https://www.php.net/manual/datetime.format.php */
var singleDayEvent = __( 'l, M j, Y' ),
/* translators: Date string for upcoming events. 1: Month, 2: Starting day, 3: Ending day, 4: Year. */
multipleDayEvent = __( '%1$s %2$d–%3$d, %4$d' ),
/* translators: Date string for upcoming events. 1: Starting month, 2: Starting day, 3: Ending month, 4: Ending day, 5: Ending year. */
multipleMonthEvent = __( '%1$s %2$d – %3$s %4$d, %5$d' );
// Detect single-day events.
if ( ! endDate || format( 'Y-m-d', startDate ) === format( 'Y-m-d', endDate ) ) {
formattedDate = dateI18n( singleDayEvent, startDate, timeZone );
// Multiple day events.
} else if ( format( 'Y-m', startDate ) === format( 'Y-m', endDate ) ) {
formattedDate = sprintf(
multipleDayEvent,
dateI18n( _x( 'F', 'upcoming events month format' ), startDate, timeZone ),
dateI18n( _x( 'j', 'upcoming events day format' ), startDate, timeZone ),
dateI18n( _x( 'j', 'upcoming events day format' ), endDate, timeZone ),
dateI18n( _x( 'Y', 'upcoming events year format' ), endDate, timeZone )
);
// Multi-day events that cross a month boundary.
} else {
formattedDate = sprintf(
multipleMonthEvent,
dateI18n( _x( 'F', 'upcoming events month format' ), startDate, timeZone ),
dateI18n( _x( 'j', 'upcoming events day format' ), startDate, timeZone ),
dateI18n( _x( 'F', 'upcoming events month format' ), endDate, timeZone ),
dateI18n( _x( 'j', 'upcoming events day format' ), endDate, timeZone ),
dateI18n( _x( 'Y', 'upcoming events year format' ), endDate, timeZone )
);
}
return formattedDate;
}
};
if ( $( '#dashboard_primary' ).is( ':visible' ) ) {
app.init();
} else {
$( document ).on( 'postbox-toggled', function( event, postbox ) {
var $postbox = $( postbox );
if ( 'dashboard_primary' === $postbox.attr( 'id' ) && $postbox.is( ':visible' ) ) {
app.init();
}
});
}
});
/**
* Removed in 5.6.0, needed for back-compatibility.
*
* @since 4.8.0
* @deprecated 5.6.0
*
* @type {object}
*/
window.communityEventsData.l10n = window.communityEventsData.l10n || {
enter_closest_city: '',
error_occurred_please_try_again: '',
attend_event_near_generic: '',
could_not_locate_city: '',
city_updated: ''
};
window.communityEventsData.l10n = window.wp.deprecateL10nObject( 'communityEventsData.l10n', window.communityEventsData.l10n, '5.6.0' );